Specifications

VPM
Page 6 Visit the Premier Mounts website at www.mounts.com Installation Instructions
Opening the Collar Clasp
RemovetheM8x40mmhexscrewsfromthesidesof
theVPMtoopenthecollarclaspandbegininstallation.
Proceedtothe“Installing the Fixed Tilt Adapters
(Optional)” section.
M8 x 40mm Hex
Screw
Installing the Fixed Tilt Adapters (Optional)
Areyouusingxedtiltadaptersforanadditional
10°oftilt?
 IfYes,chooseanoption:
•Ifmounting directly to the at-panel, insert
four(4)M4x10mmscrewsfrombehindthe
frontholesofthexedtiltadaptersandinto
the100x100mmpatternoftheat-panel
(seepage14).
•Ifusing an adapter plate, insert
four(4)M4x5mmscrewsfrombehindthe
frontholesofthexedtiltadaptersandinto
the100x100mmpatternoftheadapterplate
(seepage14).
  IfNo, go to the “Selecting the Mounting
Hardware”section.
Donotovertightenthemountinghardware.
Youcanalsoattachthexedtiltadaptersupside
down,i.e.,foranupwardtiltonaoorstage
monitorstand.
Proceedtothe“Selecting the Mounting Hardware”
section.
Flat-Panel or
AdapterPlate
M4 x 10mm or
M4 x 5mm screw