Specifications

VPM
Installation Instructions Visit the Premier Mounts website at www.mounts.com Page 11
Attaching the VPM Mount to a Pole
Re-insert the M8 x 40mm hex screws or insert M8 x 40mm
securityscrewsintothetwohalvesoftheVPMtoclasp
themaroundthepoleatthedesiredposition
(Figure1).
Atleasttwoqualiedpeopleareneededtoattachthe
at-panelandVPMtoapole.
Ifyouareusinga2”pipe,replacetheM8x40mmhex
screwswithM8x60mmsecurityscrews(Figure2).
Proceedtothe“Adjusting the VPM Mount Tension”
section.
Drawings not to scale.
Mountinghardwarenotshown.
Figure 1
Figure 2
2”Pipe
M8 x 60mm
Hex Screw
Caution:
FrontplateofVPM
BackplateofVPM
M8 Screws
Tighten both screws
simultaneously
Note: Do Not overtighten the M8 Screws
-200