User Guide

- 14 -
16"
16"
Finding the wood studs behind the wall structure
Using a (commercially available) wood stud finder, locate
the 16" or 24" stud centers behind the wall. Once found,
make a pencil marking on the center of the wood studs.
See figure 9.
Measure from the floor to the desired viewing
height and mark the wall.
See figure 10.
Mark the wall and
the center of the
wood studs.
Wood stud finder
(commercially available)
Wood studs
behind the wall
structure
The wall plates have (3) 16" and (1) 24" mounting
slot positions. (Look at the assembly drawing on
page 3)
Measure and mark
the viewing height
desired on the wall
This marking will reference the
center of your flat panel display
once mounted on the wall.