Specifications

SPI

Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 7

Installing the SpiroLock™ Mount (cont’d)

Solid Ceiling Installation

Step 4



Insert one (1) #14 x 2˝ screw through each of the mounting holes (A) on the bottom of the SpiroLock™ Ceiling

Plate and into the pilot holes.

®

Tighten each screw until the SpiroLock™ Ceiling Plate is secure against the ceiling.

Do not overtighten the #14 x 2˝ screws.

Proceed to “Attaching the Projector Plate” on page 9.

You can mount the SpiroLock™ projector mount to any solid surface ceiling which has a minimum 6˝ thickness.

For concrete installation use concrete wedge anchors (¼˝ recommended) to secure the mounting hardware and

a masonry drill bit to drill the pilot holes. Wedge anchors and masonry drill bits are not supplied.

Continue on page 8.

Example Wedge Anchors and Masonry Bit

Not included