Specifications
SPI
Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 15
Technical Specications
All measurements are in inches.
Installing the Lock-It™ Security Barrel
Install the security barrel to help lock the projector plate to
the projector:
Determine which leveling barrel will be removed.
®
Remove the mounting screw.
¯
Remove the leveling barrel by turning the leveling
barrel counter-clockwise.
°
Thread in the security barrel clockwise.
±
Insert and tighten the mounting screw.
²
Attach a theft deterrent device (PCB-CSL1 or padlock,
not included) through the hole that is on the security
barrel.
Do not overtighten the mounting screw.
Counter-Clockwise
Clockwise
4.45 5.22
4.50
4.50
17.25
14.75