Specifications

Installation Instructions Page 9
The circular portion of the universal brack-
et bar must rest inside the nylon sleeve. If
seated improperly, the operation of the
RTM-S will be hindered and the nylon
sleeve will become damaged.
6. Lower the universal bracket bar and display into the
cradle (as to the left).
Nylon
Sleeve
Knurl Knob Mounting Points (a knurl knob may be placed in ei-
ther mounting hole
Locking Screws
RTM-L
7. Insert an M6 knurl knob into the knurl knob mounting
point and tighten.
8. OPTIONAL - Insert a M6 x 12mm security screw and
M6 lock washer into the mounting point and tighten
using the M5 Allen wrench (supplied).
9. OPTIONAL - Tighten the two (2) Phillips head screws
(located on the side of the mounting block) to prevent
the mount from rotating.
M6 x 12mm Security Head and M6 Lock Washer Mounting
Points (a security screw may be placed in either mounting hole).