Installation manual

MAG-EXT

Page - 4 - Installation Manual

Features

Congratulations on the purchase of your new Premier Mounts Polaris™ Universal Projector Mount. The

projector mount can be configured for ceiling and or wall installations. The Polaris™ features our exclusive

MagnaGuide™ Technology which assists the installer for quicker installation times and peace of mind. The

Polaris™ Universal Projector Mount is height adjustable from 9” to 12” to help achieve the perfect viewing

height.

A Single Wooden Stud

Mounting Points

B Solid Structure

Mounting Points

C Ceiling Plate

D Adjustable Suspension

Neck

E M6 x 20mm Security

Screw

F MagnaGuide™ - Upper

Assembly

G M4 x 12mm Security

Screw and Star Washer

H Barrel Cap

I Leveling Barrel

J Mounting Hardware

K Mounting Leg

L MagnaGuide™-Lower

Assembly

Projector Plate

M6 Square Nut

Locking Tab

Magnets

Radial Glide™ Set

Screw

Selecting the Proper Mounting Hardware

1. Invert the projector and locate the mounting points.

2. Test each size of the screws provided.

3. The correct screws should thread easily into the mounting point and not pull out when pressure is applied.

WARNING

: DO NOT OVERTIGHTEN YOUR MOUNTING SCREWS TO THE PROJECTOR CHASIS.

USING THE INCORRECT SCREW DEPTH MAY CAUSE DAMAGE TO YOUR

PROJECTOR.