Installation Manual

- 5 -
Mounting the Multi-Monitor Mount to a desk or hard surface (model: MMT)
Using the (4) M4 X 10 Phillips screws (supplied)
secure your monitor or monitors to the mounting
b
rackets. See fi
g
ure 2.
Multi- Monitor
assembly
(3) Mounting
brackets
Removable
desk clamp
Monitor
Wood screws
(commercially
available)
Multi- Monitor
assembly
(
4
)
M4 X 10
p
hilli
p
s screws
Monitor
(3) Mounting
brackets
To secure the Multi-Monitor mount to a desk or hard
surface position the post & clamp on the edge of the
desk or hard surface. Then secure the Post by turning
the two desk clamps until finger tight. See figure 1.
Optional
You may choose to secure your Multi-Monitor
directly to your hard surface by drilling (4) four holes
directly in the surface and then securing the unit with
(4) commercially available wood screws. See option
WARNING : Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure
to do so could result in serious
p
ersonal in
j
ur
y
and
p
ossible dama
g
e to the flat
p
anel
(
s
)
.