Specifications

Page 4 Installation Instructions
Installation Tools
licnePllirD elbatroP
erusaeM epaTleveL
tekcoS evirD mm41 htiw tehctaRwaS llawyrD
Stud Finder (Commercially Available) Phillips Head Screwdriver
Rubber Mallet (Commercially Available)
INW-AM325 (Qty 1)
1/16” Clear Bumper
Pad (Qty 4)
Split Lock Washer
(Qty 8)
#14 x 1-1/4”Wood
Screws (Qty 20)
INW-AM325
5/16 x 1/2” Hex Head
Bolt (Qty 8)
1/4” Wood Shims
(Qty14)
6-32 x 1/2” Phillips
Screws (Qty 6) - For
use with electrical
box installation (see
NOTE above)
INW-AM325 Side
Covers (Qty 2)
In-Wall Electrical Box
(Qty 1)
Parts List
This mounting box is shipped with all installation hardware and components. Make sure that none of these parts are
missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop
and contact Premier Mounts - [phone].
It is strongly recommended that a licensed electrician supply wire and power to the INW-AM325. Pre-wiring
must be complete prior to installing the INW-AM325.