Specifications

Fine Tune Projector Mount
Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 9
Step 4
Installing the Fine Tune Projector Mount (cont’d)
1) Insert one (1) #14 x 3˝ screw through each of the holes in the bottom of the Installation Disk and into the pilot
holes.
2) Tighten each screw until the FTP Dome and Installation Disk are secure against the ceiling.
Do not overtighten the mounting screws.
Proceed to the “Attaching the Universal Projector Plate” section.
Step 5
FTP Dome as Viewed from Below
Inscribed Arrow
Insert the Installation Disk into the underside of the FTP
Dome.
Note the arrow inscribed inside of the FTP Dome; make
sure that it is pointed in the same direction that your
projector will be pointed.