Specifications

Fine Tune Projector Mount
Page 4 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
M2.5 x 12mm Security Screw
(Qty 4)
Mounting Hardware
Parts List (cont’d)
Standard Hardware Lock-It™ Security Hardware
M6 x 12mm Security Screw
(Qty 8)
M6 x 12mm Screw
(Qty 4)
M5 x 12mm Screw
(Qty 4)
M4 x 10mm Screw
(Qty 4)
M4 x 12mm Screw
(Qty 4)
M3 x 16mm Screw
(Qty 4)
M2.5 x 12mm Screw
(Qty 4)
¼-20 x
5
/16″ Screw
(Qty 1)
M5 x 12mm Security Screw
(Qty 4)
M4 x 12mm Security Screw
(Qty 4)
M4 x 10mm Security Screw
(Qty 4)
M3 x 16mm Security Screw
(Qty 4)
M3 Flat Washer
(Qty 10)
M3 Flat Washer
(Qty 10)
Your Premier Mounts Fine Tune Projector Mount comes with the option of using Lock-It™ Security Screws.
Simply replace any of the Phillips head screws with the corresponding sized Lock-It™ Security Screws and
tighten using the appropriate size Allen wrench.
When you see the graphics below associated with a step, you have the option of using the standard
mounting hardware or the Lock-It Security hardware.
Lock-It™ Security Hardware Pack
¼-20 x
5
/16″ Security Screw
(Qty 1)
M2.5 x 10mm Screw
(Qty 4)
M2.5 x 10mm Security Screw
(Qty 4)