Specifications

Fine Tune Projector Mount
Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 13
Attaching the Universal Projector Plate (cont’d)
Step 7
1) Attach the Universal Projector Plate (if not already
attached) to each of the mounting legs by inserting
and tightening one (1) M6 x 12mm screw through the
Universal Projector Plate into the M6 square nut on
each of the mounting legs.
Single Mount Point Installation
A single ¼-20 x
5
/16″ screw must be used to attach the
Universal Projector Plate to the projector if your projector
has only one mounting point.
Do not overtighten the mounting screws.
You can use either the standard Phillips head or
Lock-It™ security hardware.
Proceed to the “Securing the Quick Set Base” section.
Step 6
Tighten the mounting screws to the projector.
Do not overtighten the mounting screws.
2) Insert one (1) Barrel Cap into the end of each leveling
barrel (except the security leveling barrel).
Proceed to the “Securing the Quick Set Base” section.
Do not overtighten the mounting screws.
You can use either the standard Phillips head or
Lock-It™ security hardware.