Specifications

EST100/EST200
Page 6 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
Step 5
Put the projector arm cover plate on the projector arm.
Projector Arm
Projector Arm
Cover Plate
Step 6

Place the projector arm assembly within the desired mounting slots on the
back plate.

Use four (4) M5 x 10mm security screws, four (4) M5 at washers and four
(4) sleeve bushing nylons to attach the projector arm assembly to the back
plate.
The elongated mounting slots in the back plate allow some lateral shift for
precisely adjusting the projector arm.
Use four (4) #14 x 2” wood screws to mount the back plate to the wooden studs
where the pilot holes are.
The elongated mounting slots in the back plate allow some lateral shift for
precise adjustments against the studs.
Proceed to the “Throw Distance Calculation” section on page 10.
Step 7