Specifications

Page 12 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
EST100/EST200
Step 7

Insert one (1) Barrel Cap (except for the security barrel) into the end of each
leveling barrel.
Go to the “Attaching the Mount Carriage to the Projector Arm” section on
page 15.
Step 6

Tighten the mounting screws which secures the mounting legs to the
projector.
Do not overtighten the mounting screws.
Single Mounting Point Installation
A single ¼-20 x
5
/16″ screw must be used to attach the mount carriage to the
projector if your projector has only one mounting point.
Do not overtighten the ¼-20 x
5
/16″ screw.
Proceed to the “Attaching the Mount Carriage to the Projector Arm” section
on page 15.