Specifications

AM50
Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.com Page 7
Step 3
Drill four (4) holes in the center of each of the marks
using a power drill and a ⅛˝ drill bit.
Only use a ⅛˝ drill bit when drilling the holes.
Step 4
1) Place the wall plate against the wall and align it with
the holes.
2) Insert one (1) #14 x 2″ wood screw into each of
the mounting holes and tighten using a Phillips
screwdriver.
Do not overtighten the wood screws.
Proceed to the “Mounting Hardware” section.
The supplied
5
/16″ concrete wedge anchors must be
used for concrete installation.
You will need a
5
/16″ masonry drill bit, which is
available at your closest hardware store.
Concrete Installation
Concrete Wedge Anchors
Example of
5
/16″ Masonry Drill Bit (Not Included)
Installing the Wall Plate (cont’d)
X
X