Specifications

AM300/AM300-B
Page 6 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
Installing the Swingout Arm
The following procedures instruct you on installing your AM300/AM300-B Universal Swingout Arm on to wall studs or
a concrete wall. Please read these installation instructions once thoroughly before attempting to install your Premier
Mounts product.
Please take a minute to familiarize yourself with the contents of the package and make sure you have all the parts and
tools you need to safely complete the installation.
In addition, some steps of this installation may require two people to prevent personal injury and/or damage to your at
panel. Please obey all warnings in the following installation procedure, observe safe installation practices, and utilize
proper safety equipment at all times.
Proceed to the “Mount Orientation” section.
Introduction
Your AM300/AM300-B Universal Swingout Arm is designed to be installed with the Swingout Arm opening to either
the left-hand or right-hand side. Simply invert the AM300/AM300-B Universal Swingout Arm and re-orient the
Nose Piece.
Proceed to the “Nose Piece Orientation” section.
Mount Orientation
Left-Hand Swingout Arm Orientation
Right-Hand Swingout Arm Orientation
Nose Piece
Upright Orientation