Universal TPM Brochure

Universal Top-of-Pole PV Mounting (UTPM) System
Key Bene ts
■
Maximum Strength
■
Universal Design,
Mounts most 60
cell modules
■
Ease of Assembly,
Reduced Parts
■
Single Ground
Penetration
■
Seasonal Tilt Angle
Adjustment
Maximum Strength, Durable Design
■
Standard design withstands 90 MPH
wind zones
■
Welded steel Strongbacks and
mounting sleeves, powder coat fi nish
■
6000 series structural aluminum
mounting rails, mill fi nish
■
Stainless steel module mounting hardware
The UTPM is designed to install quickly and
provide a secure mounting structure for PV
modules on a single pole. The universal
design adapts to various 60 cell PV modules
and provides for an easy assembly. The UTPM
utilizes high-strength welded steel components
Ease of Assembly,
Reduced Labor Costs
■
Slide plates provide
easy adjustment
■
Compatible with WEEB
bonding washers
■
Double hole plate aligns
module spacing
■
Easy access bottom
fl ange bolting
Application Flexibility
■
Several UTPM sizes available to mount
4 through 15 modules
■
Secures most 37 - 42" wide by 61 - 67" long
PV modules
*
■
Installs over standard Schedule 40 or 80 rigid
steel pipe (Installer Supplied)
■
15° to 65° tilt angle settings (10° increments)
■
Mount up to 4 kW on a single pole
Foundation Design Support available
from PLP’s staff of engineers.
Ordering Guideline
UTPM8-G
Number of Modules
Options: 4, 6, 8, 10, 12, and 15
PLP Module Series
and corrosion resistant hardware for long-term
reliability. Seasonal adjustability for maximizing
electrical production is provided by six different
tilt-angle settings and is a single person operation.
Module Rails
Cross-Bars
Support Bar
Mounting Sleeve
Double Hole Slide Plate
Single Hole Slide Plate
Strongback
Albuquerque Office
1700 Louisiana Blvd., Suite 130
Albuquerque, NM 87110 USA
Corporate Headquarters
660 Beta Drive
Cleveland, Ohio 44143 USA
Telephone: [phone]
Fax: [phone]
Website: preformed.com
Email: [e-mail]
© 2018 Preformed Line Products
Printed in U.S.A.
SL-SS-1129-7
01.18.IH
*
PV Modules without a bottom
fl ange and 1/4" mounting holes
cannot be used with UPTM’s.