TPM Selection Guide

Top-of-Pole Mounting Options Selection Guide
Instructions: Add Options to the end of TPM part number in the order listed below
Part Suffix Description
HWV High Wind Version
SSH Stainless Steel Hardware for Rack Assembly
TRH Tamper Resistant Hardware for Module Mounting
HGS Hot-dip Galvanized Steel Components
PCA Powder Coated Aluminum Components
AA Anodized Aluminum Components
Ordering Guideline
TPM8–D–HWV–AA
*Important: Include module manufacturer’s specication
sheet with PO
Number of modules
PLP Module Series
Upgrade Options
High Wind Version upgrade – up to 130 MPH or 60 psf Ground Snow Load.
Sites that exceed conditions for HWV will require a review by PLP Solar.
Stainless Steel Hardware for Rack Assembly - SSH Package includes 100% stainless hardware for the structure
Finish Upgrades
HGS Hot-dip Galvanized Steel Components
PCA Powder Coated Aluminum Components
AA Anodized Aluminum Components
5. Mounting Sleeve Upgrade
2.5" 3" 4" 6" 8"
2"
2.5IN 3IN 4IN 6IN 8IN
2.5" –
3IN 4IN 6IN 8IN
3" – –
4IN 6IN 8IN
4" – – – 6IN 8IN
6" – – – –
8IN
Standard
Mounting Pole
Tamper Resistant Hardware for Module Mounting - TRH Package includes stainless steel pin-in-hex machine screws with nylon-insert lock nuts and matching hex-key
Part Suffix Description
8IN Mounting sleeve upgrade to 8" steel pipe
6IN Mounting sleeve upgrade to 6" steel pipe
4IN Mounting sleeve upgrade to 4" steel pipe
3IN Mounting sleeve upgrade to 3" steel pipe
2.5IN Mounting sleeve upgrade to 2.5" steel pipe
T
elephone: 440.461.5200
Fax: [phone]
Website: preformed.com
Email: [e-mail]
© 2020 Preformed Line Products
SL-PL-1000-12
12.20.00
Global Headquarters
660 Beta Drive
Cleveland, Ohio 44143 USA
Powder Coated Steel Components Standard as of July 2016.
HWV
TRH
SSH