MPM-G2 Assembly Instructions

Figure 6-2: Changing the Tilt Angle
Remove 1/2”
Lock Bolt
and Washers
Loosen Pivot Bolt
(DO NOT REMOVE)
Reinstall 1/2”
Lock Bolt
and Washers
Retighten Pivot Bolt
Rotate Power Rail
Note: Rotated to a 40-degree tilt angle.
Note: Modules not shown for clarity.
WARNING:
Do not attempt to
remove the Pivot
Bolt during tilt
adjustments!
Removal could
lead to serious
personal injury or
death. Adjustments
are made with the
Pivot Bolt
hardware loosened
but in place.
Assembly Instructions, Multi-Pole Mount - G2 (Version 1, Rev D) 15 of 15
Corporate Headquarters
660 Beta Drive
Mayfield Village, OH 44143
Albuquerque Office
1700 Louisiana Blvd., Suite 130
Albuquerque, NM 87110
Telephone: [phone]
Fax: [phone]
www.preformed.com
E-mail: [e-mail]
© 2017 Preformed Line Products
PCN 042412-1 Version 1, Rev D
SP3287-2