Users Manual Part 1

Using NMEA2000 for GPS
If using your vessels NMEA2000 network then connect the optional device cable from the M12
connector on the back of the DataHub to a tee on your NMEA2000 backbone. NMEA200
device cables and tees can be purchased directly from PredictWind with your DataHub order.
Once connected to the NME2000 network select “NMEA2000 on CAN0” as the GPS source.
Verifying your GPS data feed
Selecting the “Status” tab in the NMEA section will display live GPS data as it streams into the
device.
ACTIVE under “Status” means that you have valid GPS data. A “Status” of VOID indicates that
NO or invalid GPS data is being received.
Please confirm that you are indeed getting valid GPS data before proceeding.