Owner's Manual

Page 11For technical questions, please call 1-888-866-5797.ITEM 59190
SAFETYSETUPOPERATIONMAINTENANCE
Remove the Shipping Brackets
To protect the Generator during shipping, Shipping Brackets have been installed between the Engine
and Frame. These brackets MUST BE REMOVED BEFORE adding oil or gasoline to the Generator.
NOTICE: DO NOT attempt to start Generator without first removing the Shipping Brackets.
Damage to the Generator as a result of not removing the Brackets will void the warranty.
1. BEFORE filling the Engine with oil or gasoline, tip the Generator onto its recoil end. Tip onto the flattened
cardboard box the Generator came in or other protective surface so as to not scratch the Frame.
2. Remove the Bolts from the orange Shipping Brackets. Bolts and Shipping Brackets can be discarded.
Figure A: Remove Both Shipping Brackets and Bolts
3. Tip the Generator upright.