User's Manual

Precyse Technologies, Ltd..
Date: 27 June 2012 Page 6 of 9
P.W.Precyse WirelessLtd.
Rosh Ha’ayin 48092
Tel: [phone]
Fax: [phone]
Product description
AGPS tag:
The SA Tag is used to track assets in real time. It is based on an RF transceiver and a
microcontroller.
It uses the iLocate proprietary protocol which provides a 2 way, half duplex communication with
the base station.
The unit is powered by 1 AA lithium thionyl chloride (Li-SOCl2) batteries and is hermetically
sealed.
Technical Parameters
Models:
E3-HuTag-AGPS Part number: SA91/004000
Performance:
Read range: up to 1km. (Within line of sight)
Write range: up to 1km. (Within line of sight)
Read rate: 250Kbps.
Write rate: 250Kbps.
Battery size: 1 3.6V AA Lithium non rechargeable (LI-SOCl2)
Battery life: up to 5 years, depends on application and use patterns
Communication:
Frequency: 902-926MHz ISM license free band
Modulation: 2-FSK
Channel bandwidth: 800KHz
EIRP: Up to 15dBm, digitally controlled
Communication protocol: 2WiSAP, optional AES128 Encryption
Transmission: Event base and on demand
External interfaces: 2 user buttons, buzzer, GPS receiver.
Internal sensors: Motion, temperature sensors.
Electrical:
Power supply: 1 3.6V AA battery, The battery is replaceable only by technician.
Caution! risk of explosion if battery is replaced with incorrect type.