User's Manual

PBS installation guide

PBS - rear view

Connector /

indicator

Description

1. Power indicator

LED (red)

On - Power is connected.

Flashing - There is a problem with the power supply.

Off – power supply not connected.

2. Synch indicator

Synchronization LED (green)– Flashes once a second when

the system is active

3-6. PBS channel

indicators #1-4

Green LED (green) – flashes when a signal is sent on the

corresponding channel

7. DC Power port

DC power port (12V-2.08A, 25W MAX)

8. Heartbeat port

Not used at this stage

9-12. TCP\IP port 1-4

Network connector for corresponding channel. RJ45

connector.

13,16. RF Channel 1,4

antennae connectors

Physical antenna connector for the corresponding channel.

14, 15

RF transmit, RF receive – Connected to Amplifier unit.

17. External amplifier

connector

A DB9 connector that contains power and control

outputs.

Warning: Do not connect this port to a computer or any

other RS232 terminal equipment.

17. External amplifier

connector

18. Synch Generator

(GPS Antenna)

13-16. RF Channels

antennae connectors