User's Manual

PBS installation guide

Checking the installation

Visual check after connection

 Verify that the power LED indicator (red) is on when the power is connected.

 Verify that the appropriate PBS RF Channel indicator is on.

 Verify that the Appropriate LAN LED indicator is on

 Check connection of PBS to the network / server ( ping ) .

Appendix A: Marketing and installation

1. The product intended use and application:

The BS24103000 (PBS) is used as a radio base station for the iLocate system.

By transmitting a synchronization signal, and receiving transmissions from other

devices on the iLocate network it acts as a bridge between the iLocate hardware

and a personal computer.

2. The EUT is installed either indoors or outdoors (inside an appropriate sealed

box).

The installation requirements are proper site planning, infrastructure (AC supply

with an AC to DC adapter or DC supply, mechanical mounting, clearance around

it), sealed box (Per Precyse Tech’s requirements, an IP55 or equivalent

boxuninterrupted power supply where required, etc).

3. Marketing:

The EUT is sold to system integrators only. It is not available for non-

professionals.