Operating and Maintaining the P80 Console Precor Incorporated 20031 142nd Avenue NE P.O.
Edition Information OPERATING AND MAINTAINING THE P80 CONSOLE P/N 303135-112 rev C Copyright © May 2014 Precor Incorporated. All rights reserved. Specifications subject to change without notice. This document applies to Preva version 4.0 and P80 console software version 4.0. Trademark Note Precor, AMT, EFX, and Preva are registered trademarks of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners. iPod® is a trademark of Apple Inc.
Intellectual Property Notice All rights, title, and interests in and to the software of the Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be. Precor is widely recognized for its innovative, award-winning designs of exercise equipment. Precor aggressively seeks U.S.
Important Safety Instructions Important: Save these instructions for future reference. Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and owner’s manuals, before installation of this device. Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit).
6 Operating and Maintaining the P80 Console Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety notices. These precautions include the following: Read all instructions in this guide before installing and using the equipment and follow any labels on the equipment.
Important Safety Instructions Care should be taken when mounting or dismounting the equipment. For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features. For AMT and EFX: Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
8 Operating and Maintaining the P80 Console SPACING—The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standards and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: – Treadmills—a minimum of 0.5 m (19.7 in.) on each side of the treadmill and 2 m (78 in.) behind the machine. – Cardio equipment other than treadmills—a minimum of 0.5 m (19.7 in.) on at least one side, and 0.5 m (19.7 in.
Important Safety Instructions 9 Maintain the equipment to keep it in good working condition, as described in the Maintenance section of the owner’s manual. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use. If you plan to move the equipment, obtain help and use proper lifting techniques. Equipment Weight Restrictions: Do not use the treadmill if you weigh more than 500 pounds (225 kg).
10 Operating and Maintaining the P80 Console Hazardous Materials and Proper Disposal The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service.
11 Important Safety Instructions Regulatory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio-frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between -20°C and 85°C (-4°F and 185°F). Radio Frequency Interference (RFI) The RFID module conforms to the following national standards defining acceptable limits for radio frequency interference (RFI).
12 Operating and Maintaining the P80 Console Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003.
13 Important Safety Instructions Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards.
14 Operating and Maintaining the P80 Console Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Important Safety Instructions 15 Electrical Recommendations: 120 V and 240 V Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. You should have received a power cable that meets your local electrical code requirements along with the equipment. Precor treadmills must be connected to a 20 amp individual branch circuit that can be shared only with one PVS.
16 Operating and Maintaining the P80 Console Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power connection is required. For a 20 amp branch circuit up to 10 screens can be connected.
Table of Contents Important Safety Instructions .................................................... 5 Safety Precautions ................................................................................ 6 Hazardous Materials and Proper Disposal .................................. 10 Product Recycling and Disposal ..................................................... 10 Regulatory Notices for the RFID Module ....................................... 11 Regulatory Notices for Cardiovascular Exercise Equipment ..
18 Operating and Maintaining the P80 Console Beginning Your Workout .......................................................... 55 Starting a QuickStart™ Workout ....................................................55 Starting a Featured Workout .......................................................... 56 Starting a Preset Workout ............................................................... 56 Ending a Workout ..............................................................................
Chapter 1 Getting Started The P80 console offers administrators and users the ability to set default settings that meet their specific needs. To accomplish this, the console supports settings for different classes of users depending on their administrative rights. A guest user exercises on a piece of equipment without signing in or creating a Preva account. A registered user has created a Preva account and uses a sign-in password or Preva Token to use that account.
20 Operating and Maintaining the P80 Console Identifying Parts of the Console The following figure provides information about the console keys. The number and actions of the console keys may differ slightly depending on the type of equipment. Figure 4: P80 console keys Table 1.
21 Getting Started Using the Treadmill Safety Clip The treadmill is equipped with three different stop functions, which behave as follows: If the user … Then the treadmill belt … Slows to a Pulls on the lanyard attached to the safety stop clip and trips the restart switch And the console … Shows the words PUSH THE RESET SWITCH. On some console models, an arrow points toward the Restart switch. Presses down on the red STOP button Slows to a stop Shows that the exercise workout is paused.
22 Operating and Maintaining the P80 Console Instruct users on how important it is to use the safety clip while exercising on the treadmill, and demonstrate how they should attach it to their clothing near the waistline. If the restart switch trips during exercise, perform the following steps: 1. Reattach the safety clip if necessary. 2. Press the restart switch down until it clicks, returning it to its normal position.
23 Getting Started Tip: The small, flexible tab underneath the restart switch is designed for storage of the safety clip. When the treadmill is not in use, attach the safety clip to the tab as shown in the following figure.
24 Operating and Maintaining the P80 Console Treadmill Auto Stop™ (Automatic Stop) Function Important: The default setting for this feature is ON. An administrator can turn off this feature in the System Settings; however, Precor recommends it remain ON. The Auto Stop™ (Automatic Stop) feature is designed to bring the treadmill to a gradual stop when it is not in use. This might occur if a user steps off the treadmill before the end of a workout and leaves the treadmill running.
Chapter 2 Configuring the System Settings Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment. Important: A special code is required to access these settings. Do not share this code with anyone except those authorized to change system settings.
26 Operating and Maintaining the P80 Console 2. While holding Pause, press each of the following keys once in the order presented. Referring to the diagram below, press: 1234 Channel Up Volume Down Volume Up Channel Down Figure 9: Settings security code 3. Release Pause. 4. Using the keyboard on the screen, touch the following numbers to enter the password: 5651565 5. Touch OK.
27 Configuring the System Settings About System information settings provide basic information including equipment models and serial numbers. Most of these settings are for informational purposes only and cannot be modified. To view the System Info settings menu: 1. Use the administrator code and password to view the equipment settings. 2. Touch About. Table 2.
28 Operating and Maintaining the P80 Console Setting Access Detail Heartbeat Interval Only Precor service technicians can modify this setting. Determines how often the console communicates with the server. Minimum Heartbeat Interval Only Precor service technicians can modify this setting. Minimum number of times that the console communicates with the server in a given time period. Maximum Heartbeat Interval Only Precor service technicians can modify this setting.
29 Configuring the System Settings Equipment Usage The Equipment Usage settings provide information on individual usage as well as cumulative equipment usage. This information and these settings are accessible only to administrators and registered service technicians. To view the Usage settings: 1. Use the administrator code and password to view the equipment settings. 2. Touch Equipment Usage. Table 3.
30 Operating and Maintaining the P80 Console Maintenance (Treadmills Only) Experience Series treadmills manufactured after June 2014 include many improvements in design, function, and usability. One of those improvements is the status indicator light at the front of the treadmill hood, which gives a club owner or technician an easy way to check up on the condition of all of their treadmills.
31 Configuring the System Settings Table 4. Active status light appearances and their meanings Status light appearance Meaning Action required Steady (solid) blue The treadmill is None. operating normally and does not currently need maintenance. Pulsing blue The treadmill is due for Perform the needed scheduled maintenance, then reset the maintenance (P80 status light. console only), or the treadmill belt needs to be replaced (except for 230 V models).
32 Operating and Maintaining the P80 Console To change the Maintenance settings and view the treadmill’s current status: 1. Use the administrator code and password to view the equipment settings. Note: A text message to the right of the Maintenance command provides additional information about the service the treadmill currently needs. 2. Touch Maintenance. The Recommended Action heading on the Maintenance screen advises you whether or not the treadmill needs attention at this time.
Configuring the System Settings 33 System Settings Use the System Settings to test your equipment and set parameters that benefit your users and your facility. The System Settings menu is visible only to administrators and registered service technicians. The System Settings menu contains the following sections: Connectivity Display TV Settings Workout Limits Manage Settings Precor recommends that you configure the P80 consoles in your facility by sharing setting files.
34 Operating and Maintaining the P80 Console Connectivity Configuring your audio, video, and network infrastructure requires expertise. Precor strongly recommends that you work with a qualified contractor to set up this infrastructure. To view connectivity information: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings, then Connectivity. Table 5.
35 Configuring the System Settings Display Use the Display settings to personalize language and time zone settings for your facility. To view and change the Display settings: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings, then Display. Table 6.
36 Operating and Maintaining the P80 Console TV Settings TV Settings help you set up television channels for your users. The TV Settings are: Channel Guide Region Default Channel Volume Correction Skip Unnamed Channels Extensive Scan Closed Captioning Export/Import Channel Names To view TV Setting information: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings, then TV Settings.
Configuring the System Settings To run an extensive scan: 1. Touch System Settings. 2. On the System Settings menu, touch TV Settings. 3. Touch Extensive Scan. Note: This scan may take up to two hours to complete. 4. Touch On, then OK. 5. Touch Extensive Scan again. On should still be selected. 6. Touch OK to begin extensive scan. To edit a channel’s displayed name: 1. On the Channel Guide screen, touch the listing for the channel you want to rename. 2.
38 Operating and Maintaining the P80 Console To clear the Channel Guide completely: 1. On the Channel Guide screen, touch Delete All. 2. When asked "Delete All Channels?", verify that you want to proceed, then touch Delete All again. Table 7. TV Settings Settings Detail Default Channel Guide Use to scan basic channels Region Select the appropriate region for your United location. States Default Channel Set a default channel for the equipment.
Configuring the System Settings 39 4. On the System Settings menu, touch TV Settings, then Export/Import Channel Names. 5. When the box is lit, touch Export to USB. The channel-guide.json file is saved on your USB drive in the /precor folder. 6. Touch OK to return to the System Settings menu. 7. Touch Back twice to return to the Welcome screen. Important: You must return to the Welcome screen before you remove the USB drive. 8. Remove the USB drive from the console and insert it into your computer.
40 Operating and Maintaining the P80 Console Workout Limits The Workout Limit settings give you control over how the equipment is used. Use these settings to create reasonable limitations for equipment usage including speed, incline, resistance, and duration. In general, fitness equipment use is based on its popularity with users and its availability during a site’s busiest times of day.
41 Configuring the System Settings Setting Name Setting Options Resistance Range • Low • Medium • High (Bike) Speed Limit Default Value High 1-16 mph (2-25 kph) 12 mph (19 kph) Incline Limit (Treadmill) 0-15 15 Autostop • On (Treadmill) • Off Crossramp Auto-Level • Sets the default position for the crossramp (Treadmill) (Incline range is -3 to 15) On 10 (EFX) Manage Settings Use the Manage Settings feature to save your personalized equipment settings to a USB drive, or to impor
42 Operating and Maintaining the P80 Console To save your equipment settings to a USB drive: 1. Insert a USB drive into the console. 2. On the System Settings menu, touch Manage Settings, then Export to USB. 3. Touch OK to accept the export and return to the System Settings menu. Note: This procedure exports updates to the channel guide, equipment settings, network settings, and channel frequencies. 4. Touch Back twice to return to the Welcome screen.
Chapter 3 Introducing Users to the P80 Console The P80 console offers clear visuals and a touch-screen layout that encourages program exploration. Multiple preset workouts are designed to help individual users meet their fitness goals, and the console keys and durable motion controls are responsive and easy to use.
44 Operating and Maintaining the P80 Console Changing the Display Language The Welcome screen appears in the default language selected for your region. If you want the display to use a different language for your workout, you can select the language you want. After your workout is complete, the screen will return to the default language. Tip: You can save your language selection by getting a Preva account.
Introducing Users to the P80 Console 45 To use the touch heart rate feature, place the palm of your hands directly on the metal heart rate sensors on the equipment’s handlebars. To ensure an accurate heart rate readout, make sure you follow these tips: Both hands must grip the sensors for your heart rate to register. It takes a number of consecutive heartbeats (15-20 seconds) for your heart rate to register. When gripping the sensors, do not grip tightly. Keep a loose, cupping hold.
46 Operating and Maintaining the P80 Console Using a Chest Strap Transmitter WARNING Signals used by the chest strap transmitter (or heart rate strap) may interfere with pacemakers or other implanted devices. Consult your physician and the manufacturers of your chest strap transmitter and implanted device before using a chest strap transmitter. Wearing a chest strap transmitter during your workout provides steady heart rate information.
Introducing Users to the P80 Console 47 Using Different Screen Views Important: Some Preva features are available only at facilities that subscribe to Preva. Contact Precor to update your subscription if needed. During your workout, you can switch between different types of information and entertainment on the console screen.
48 Operating and Maintaining the P80 Console Changing the Media View While you are watching either a TV channel or a video clip, you can always switch to Preva Net to read a web article.The Media View button at the bottom of the screen helps you move back and forth between these two views, while the Select button gives you a way of changing what you see in each of them. Note: You cannot play a TV channel and a video clip at the same time.
Introducing Users to the P80 Console 49 Using the Workout Progress Panel Use the Workout Progress panel to customize your workout. This is the first panel that displays once you select a workout or touch GO. If you are on the Media panel, there are two ways to return to the Workout Progress panel. To return to the Workout Progress panel: 1. On the Media panel, touch the Workout icon, or slide the right edge of the next panel across the screen. 2.
50 Operating and Maintaining the P80 Console Using the Media Panel The Now Playing Media panel displays available media sources. Select a media source such as TV, iPod, or on-demand web video, and then use the browsing feature to listen to that media while you browse Preva Net. To choose a media source: 1. On a Workout Progress panel, touch the Media icon, or slide the right edge of the next panel across the screen. Figure 14: Media icon 2. The Media panel describes the current media selection.
Introducing Users to the P80 Console 51 Connecting and Using Your iPod® You can listen to your favorite music and control your iPod directly from the console. To connect your iPod: 1. Insert the iPod into the connector at the top of the console and place your iPod securely in the pocket provided. The media panel displays the words Now Playing iPod along with the name of the song currently playing. 2. Plug your headphones into the console.
52 Operating and Maintaining the P80 Console Watching On-Demand Web Videos While you work out, you can browse through a variety of fitness, music, and entertainment videos selected for you by the fitness facility and Precor. To watch on-demand web videos during your workout: 1. Touch the Media icon at the bottom of the console screen. Figure 16: Media icon 2. On the Media panel, touch On Demand. 3. In the On Demand screen, drag the tiles to find the video playlist you want to watch.
53 Introducing Users to the P80 Console Using the Preva Net Panel WARNING For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features. For AMT and EFX: Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
54 Operating and Maintaining the P80 Console 3. On the Preva Net panel, select an option. Table 11. Preva Net panel Button Action Featured Displays feeds of specific interest during a workout. Preva Feeds Displays feeds selected by the management of your facility. Note: The facility administrator can use Preva Business Suite to rename the Preva Feeds button. All Displays a larger selection of feeds. Web Opens a browser window. Off Turns off the Preva Net feature.
Chapter 4 Beginning Your Workout CAUTION: If you are using a treadmill, be sure to attach the security clip to your clothing before starting your workout. The P80 console offers many different workout options. The following sections explain the type of workouts available and how to get started using them. Starting a QuickStart™ Workout The QuickStart workout begins your workout in the Manual mode. Default calculations, such as calories burned, are based on a 150 pound (68 kg), 35-year old individual.
56 Operating and Maintaining the P80 Console Starting a Featured Workout The Featured Workout appears in a panel on the Welcome Screen. Use Featured Workouts to explore the fitness benefits of preset programs and to add variety to your workout. To begin a Featured Workout, touch Go on the Featured Workout panel. Starting a Preset Workout Preset workouts are a great way to tailor your workouts to your fitness goals, stay challenged, and add variety to your sessions.
57 Beginning Your Workout 4. Anytime during a workout, you can touch Pause. When touched, the workout pauses and you can choose to Resume or Finish your workout. To continue your workout, touch Resume. If you choose to finish a workout, the Workout Summary screen displays your workout status for that session. Table 12. Preset workout descriptions Goal Workout Details Lose Weight Burn calories and fat. Be Fit Condition your cardiovascular system.
58 Operating and Maintaining the P80 Console Ending a Workout Some preset workouts have a five minute cool down period added to the end of the workout. . Cooling down is an important aspect of your workout because it helps reduce muscle stiffness and soreness by transporting excess lactic acid out of the working muscles. In addition, a five minute cool down period allows your heart rate to return to its normal, resting state. To end your workout, touch Pause, and then Finish.
59 Beginning Your Workout Table 13. Examples of Personal Information settings Setting Setting Options Age • Over 85 • 75 - 84 • 65 - 74 • 55 - 64 • 45 - 54 • 36 - 44 • 35 • 25 - 34 • 18 - 24 • Under 18 • Over 310 • 290 - 309 • 270 - 289 • 250 - 269 • 230 - 249 • 210 - 229 • 190 - 209 • 171 - 189 • 170 • 150 - 169 • 130 - 149 • 110 - 129 • Under 110 Weight Default Access Value 35 Admin/ Tech: Detail Enter age as a value or a range.
60 Operating and Maintaining the P80 Console Adjusting the Workout Intensity To adjust the equipment incline, speed, and/or resistance, use the motion controls located just below the console keys. Figure 18: Motion controls Adjust the motion controls, upward or downward, to change the incline, speed, or resistance. Figure 19: Adjust motion controls up or down Many preset workouts will adjust these settings automatically to meet the workout intensity.
61 Beginning Your Workout Viewing Your Workout Status While Exercising The Status Bar contains status measurements and is visible across the top of the viewing screen. Information displayed in the Status Bar helps you measure how your body is responding to the exercise session.
62 Operating and Maintaining the P80 Console Scoring Your Fitness Workout This information helps you interpret your score for the Test Your Fitness workout. The score for this test is determined by this formula: Rate of oxygen (O2) consumption, in ml per minute, modified for the user’s maximum heart rate (220 - age), divided by the user’s weight in kilograms. Table 14.
Beginning Your Workout 63 Introducing Preva® Accounts to Your Users Important: Some Preva features are available only at facilities that subscribe to Preva. Contact Precor to update your subscription if needed. Creating a Preva Account Preva is a personalized fitness experience specifically designed and built to help your users achieve their goals. Users can create their own personal profile, set up weekly goals, track progress, and earn fun badges along the way.
64 Operating and Maintaining the P80 Console Next time you sign in on Preva-equipped fitness equipment, your Preva account information will load and you can begin your workout immediately. In addition, the Sign In key on the Welcome screen becomes a Favorites key. Use this function to save your favorite workouts so you can use them again at another time. Note: Currently, once your account has been created, you cannot update account information other than weight. Table 15.
65 Beginning Your Workout Creating a Goal Important: Some Preva features are available only at facilities that subscribe to Preva. Contact Precor to update your subscription if needed. Use the Weekly Goal panel to create a workout goal. When you set up your goal, you commit to: A target value (distance, duration, or calories) for each workout. A specific number of times you plan to work out each week. Preva will track your progress based on the target you define and keep track of your lifetime totals.
66 Operating and Maintaining the P80 Console 4. Enter the values required to meet your fitness goal, then touch Next. Table 16. Target Values Target Minimum and Maximum Values Default Distance Maximum - 50 miles / 80 km Minimum - 1 mile / 1 km 3 miles/ 5 kilometers Duration Maximum - 120 minutes Minimum - 10 minutes 30 minutes Calories Maximum - 1000 calories Minimum - 100 calories 350 5. Enter your Weight, then touch Next. 6.
Beginning Your Workout 67 Tracking Your Progress Toward Your Goal Use the Weekly Goal panel to update your weekly goal, track your progress, and view your lifetime totals. The Goal CompassTM is a graphic summary of your weekly progress toward your goal.
68 Operating and Maintaining the P80 Console Table 18. Interpreting the Weekly Progress Panel Number Setting Definition This Week’s Days remaining to reach your goal. A Progress workout week begins on Monday and ends on Sunday. On When you set up your goal, you commit to Track/Off a target value for each workout and to work Track Status out a number of times each week. If you have exceeded your workout targets in any previous workout, this value shows you how much ahead of pace you are.
69 Beginning Your Workout Number Setting Definition Target Marker (blue) The target marker shows how much exercise you committed to completing in each workout to reach your weekly goal. Suggested Target Marker (yellow) If you are off pace for the week, the Suggested Target Marker shows how much additional exercise you should complete in each remaining workout to reach your weekly goal. Workout Target Displays how much exercise you should complete in each workout to reach your weekly goal.
70 Operating and Maintaining the P80 Console Preva Tokens Once you create a Preva account on a P80 console, you can use a Preva token to sign into that personal account. Contact Precor for more information on Preva tokens. To sign into your personal account, hold your Preva token to the token icon in the upper right corner of the console. Figure 21: Preva token icon A Preva token can only be associated with one account at a time.
Chapter 5 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals suggested. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks. If the equipment uses an optional power adapter, disconnect the adapter.
72 Operating and Maintaining the P80 Console To clean the screen: The manufacturer recommends diluting one part 91% isopropyl alcohol solution in one part water, or using the 91% isopropyl alcohol solution in its original strength. Be sure to follow the solvent manufacturer’s precautions and directions when using any solvent. CAUTION: Potentially hazardous situations associated with the use of isopropyl alcohol may result in minor or moderate injury and property damage.
Operating and Maintaining the P80 Console Precor Incorporated 20031 142nd Avenue NE P.O.
P80 Console Wiring Quick Start Guide WARNING Connecting the safety key cable (treadmills only) Before you connect any cables to the console, make sure that the equipment is not connected to any external power source.
Assembling and Maintaining TRM 800-Series Treadmills Precor Incorporated 20031 142nd Avenue NE P.O.
Assembling and Maintaining TRM 800-Series Treadmills
Edition Information ASSEMBLING AND MAINTAINING TRM 800-SERIES TREADMILLS P/N 303175-112 rev C Copyright © August 2014 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, EFX, and Preva are registered trademarks of Precor Incorporated. Other names in this document may be the trademarks or registered trademarks of their respective owners.
Important Safety Instructions Important: Save these instructions for future reference. Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and owner’s manuals, before installation of this device. Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit).
4 Assembling and Maintaining TRM 800-Series Treadmills Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safety notices. These precautions include the following: Read all instructions in this guide before installing and using the equipment and follow any labels on the equipment.
Important Safety Instructions Care should be taken when mounting or dismounting the equipment. For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features. For AMT and EFX: Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
6 Assembling and Maintaining TRM 800-Series Treadmills SPACING—The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standards and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: – Treadmills—a minimum of 0.5 m (19.7 in.) on each side of the treadmill and 2 m (78 in.) behind the machine. – Cardio equipment other than treadmills—a minimum of 0.5 m (19.7 in.) on at least one side, and 0.5 m (19.
Important Safety Instructions 7 Maintain the equipment to keep it in good working condition, as described in the Maintenance section of the owner’s manual. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use. If you plan to move the equipment, obtain help and use proper lifting techniques. Equipment Weight Restrictions: Do not use the treadmill if you weigh more than 400 pounds (180 kg).
8 Assembling and Maintaining TRM 800-Series Treadmills Educating Users Take time to educate users about the Important Safety Instructions found in both the User Reference Manual and Product Owner’s Manual. Explain to your club or facility patrons that they should observe the following precautions: Hold onto a stationary handrail or handlebar while assuming the starting position on the equipment. Face the console at all times.
Important Safety Instructions 9 Product Recycling and Disposal This equipment must be recycled or discarded according to applicable local and national regulations. Product labels, in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE), determine the framework for the return and recycling of used equipment as applicable throughout the European Union.
10 Assembling and Maintaining TRM 800-Series Treadmills Regulatory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio-frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between -20°C and 85°C (-4°F and 185°F). Radio Frequency Interference (RFI) The RFID module conforms to the following national standards defining acceptable limits for radio frequency interference (RFI).
Important Safety Instructions 11 Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003.
12 Assembling and Maintaining TRM 800-Series Treadmills Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards.
13 Important Safety Instructions Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
14 Assembling and Maintaining TRM 800-Series Treadmills Electrical Recommendations: 120 V and 240 V Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. You should have received a power cable that meets your local electrical code requirements along with the equipment. Precor treadmills must be connected to a 20 amp individual branch circuit that can be shared only with one PVS.
Important Safety Instructions Obtaining Service Do not attempt to service the equipment except for maintenance tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http://www.precor.com.
16 Assembling and Maintaining TRM 800-Series Treadmills Obtaining Updated Documentation Current Precor product documentation is available at http://www.precor.com/productmanuals. You may want to check in for updated information from time to time.
Table of Contents Important Safety Instructions .................................................... 3 Safety Precautions ................................................................................ 4 Safety Code ............................................................................................ 7 Educating Users .................................................................................... 8 Hazardous Materials and Proper Disposal ....................................
18 Assembling and Maintaining TRM 800-Series Treadmills Maintenance .............................................................................. 57 Daily Cleaning ......................................................................................57 Daily Inspection .................................................................................. 58 Weekly Maintenance ......................................................................... 61 Monthly Maintenance .....................................
Chapter 1 Assembling the Treadmill Important: The instructions in the following procedures are described from the perspective of a person standing directly in front of the equipment (that is, on the opposite side of the control console from a person using the equipment). These descriptions may not match the names of certain parts in the parts list, because such parts are named relative to the back of the equipment. WARNING You will need assistance to assemble this unit.
20 Assembling and Maintaining TRM 800-Series Treadmills Before you begin, verify that you have received the following parts: Base frame assembly Left and right upright supports Center fairing with handrails Hardware kit Console Personal Viewing System (PVS), if one was part of the order Installation Requirements The location where the treadmill is installed must provide power connections that supply the appropriate voltage, a 20A individual branch circuit, and grounding per NEC (National El
21 Assembling the Treadmill Hardware Kit (not to scale) The hardware kit shipped with this equipment contains the fasteners and other hardware components shown in the following table. Before you begin assembly, make sure that your hardware kit is complete. If not, please contact Precor Customer Support.
22 Assembling and Maintaining TRM 800-Series Treadmills Corner cover (2) Access cover (2) Note: Retrieve the cables and other hardware shipped with the console before you begin installation. Unpacking the Cables To connect the console to the base unit, you may need up to four cables, as follows: Ethernet (P80 only) Television (P80 or PVS) Power (P80 or PVS) Base unit data The first three of these cables are shipped with the console or PVS.
23 Assembling the Treadmill Assembling the Frame DANGER Make sure that the treadmill is not connected to any power source before you begin the following procedures. Each of the upright supports on this treadmill has two internal channels: one to provide structural support and one to contain the cables. The following figure shows the location of the cable channel in each upright support.
24 Assembling and Maintaining TRM 800-Series Treadmills To begin assembly of the frame: 1. Gently flex the bottom front edge of the treadmill hood forward and around the bracket at the front of the treadmill base. Lift the hood off of the treadmill base and set it aside. Figure 4: Hood removal 2. Place the upright supports on the treadmill deck, next to the base frame side brackets where you will be installing them. 3.
25 Assembling the Treadmill 6. Pull the data cable gently upward through the upright support to remove any extra cable from the base of the treadmill. Drape the upper end of the data cable over the inside edge of the upright support, using tape to hold it in place if necessary. 7. Place the remaining upright support over the base frame side bracket on your right so that the rounded edge of the upright support faces you.
26 Assembling and Maintaining TRM 800-Series Treadmills 2. Connect the new power harness as shown in the following figure and table. Figure 7: P80 power harness connection points Table 1. P80 power harness connections Location Connector Drive input connector Brown lead with quick-connect terminal Blue lead with quick-connect terminal Green and yellow lead with quick-connect terminal AC input connector for DC power supply 3.
27 Assembling the Treadmill To install the accessory jack panel (treadmills with P80 consoles only): 1. Remove the two #10 x ¹ ₂-inch Phillips-head machine screws securing the blank plate at the right front corner of the treadmill, as shown in the following figure. Discard the blank plate. Figure 8: Blank plate removal 2. Feed the console cable assembly downward through the cable channel in the upright support on your right.
28 Assembling and Maintaining TRM 800-Series Treadmills 4. Pass the lower end of the Ethernet cable through the right-hand grommet and snap it into the eight-pin modular coupler installed in the jack panel. 5. Fit the lower ends of any optional console cables into the notch in the upper edge of the jack panel. 6. Place the jack panel over the opening and replace the two machine screws. Tighten the screws completely.
29 Assembling the Treadmill To attach the treadmill fairing and finish installing the cables: 1. Detach the six ¹ ₄-inch × ³ ₄-inch self-tapping panhead screws securing the back cover on the treadmill fairing, then remove the back cover. Set the back cover and the six screws aside to be reinstalled later. Note: In the following step, make sure that the plastic coverings of the treadmill arms fit over the upright supports on all sides and are not bent or pushed out of shape.
30 Assembling and Maintaining TRM 800-Series Treadmills 3. Route the upper end of the base unit data cable from the top of the upright support on your left (shown as position 1 in the following figure) through the spacing ring (position 2) and up through the cable channel on your left (position 3). Bend the ends of the cable ties around the data cable to hold it in place. Figure 11: Base unit data cable positioning 4.
31 Assembling the Treadmill Important: Do not wrench-tighten the fasteners in the following step until the unit has been fully assembled. Make sure the cables are not pinched between any fasteners and the body of the equipment, or between the arm covers and the upright supports. The Precor Limited Warranty does not cover cables damaged by improper installation. 5. Secure the fairing assembly using six ³ ₈-inch × 1-inch buttonhead screws and six ³ ₈-inch narrow flat washers.
32 Assembling and Maintaining TRM 800-Series Treadmills Completing Assembly After the upright supports and the fairing are in place, tighten the upright support fasteners and replace the hood as described in the following procedures. WARNING Before you finish assembling the treadmill base, examine the electrical bleed line between the belt motor and the frame.
33 Assembling the Treadmill To secure the fasteners: Important: The figure at the end of this procedure shows only one side of the treadmill. Be sure to complete each step on both sides before you proceed to the following step. Fully tighten the four screws that secure the sides of the upright supports to the treadmill base, as shown in the following figure. Fully tighten the two screws that secure the edges of the upright supports to the treadmill base.
34 Assembling and Maintaining TRM 800-Series Treadmills To complete assembly of the treadmill base: 1. Attach a corner cover to each of the lower front corners of the treadmill. Insert the two hooks on the inside of each corner cover into the rectangular openings in the treadmill frame, then rotate the cover into position. Figure 16: Corner cover positioning 2.
35 Assembling the Treadmill 5. Position the hood so that its screw holes line up correctly with the holes on the base of the treadmill. Figure 18: Hood installation and attachment 6. Insert one ¹ ₄-inch × ³ ₄-inch panhead self-tapping screw into each of the two side holes. Partially tighten both screws. 7. Insert one ¹ ₄-inch × 1¹ ₂-inch panhead self-tapping screw into each of the two outer holes on the front of the hood. Partially tighten both screws. 8.
36 Assembling and Maintaining TRM 800-Series Treadmills To level the treadmill: 1. Place a bubble level across the running belt to see whether the treadmill is level. Figure 19: Bubble level placement on running belt If the treadmill … Then … Is level Make sure the jam nuts on the adjustable feet are tightened securely, then skip to the next procedure. Is not level Continue with step 2. 2. Position yourself next to the adjustable rear feet. 3.
Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting hardware and connector locations whenever possible. The installation sequence for any of them is as follows: Threading the console cable assembly Connecting cables Completing the installation (tightening the mounting screws and attaching the back cover) The following sections describe how to perform these tasks.
38 Assembling and Maintaining TRM 800-Series Treadmills Positioning the Console (P80) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you line up the back plate on the console with the console mount, you must make sure that the console cable assembly passes correctly through the openings in both components.
Installing the Console 39 Connecting Cables (P80) After the console has been seated, separate the individual cables out of the end of the console cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Important: All cables must pass through the opening in the center of the console mount.
40 Assembling and Maintaining TRM 800-Series Treadmills Table 2.
Installing the Console 41 Connecting the Television Cable The console’s television tuner is mounted inside the console’s back plate. The tuner includes a short cable adapter that allows the television cable to be connected outside the back plate. To connect the television cable: 1. Pull the cable out through the lower right corner of the back plate. 2. Route the cable counterclockwise around the outside of the back plate.
42 Assembling and Maintaining TRM 800-Series Treadmills Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data cables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modular jacks in the console. Because of this, it is important to exercise caution when connecting the cables. The black Ethernet cable connects to a jack just underneath the perforated metal bracket at the very top of the opening in the console.
Installing the Console 43 Connecting the Heart Rate Sensor Cable The heart rate sensor cable passes through the cutaway opening at the upper left corner of the back plate, then down to the small circuit board at the lower left of the console. The following illustration shows how the cable should look once it is installed.
44 Assembling and Maintaining TRM 800-Series Treadmills Connecting the Power Cable Route the power cable through the cutaway opening at the upper left corner of the back plate. In the nearby opening within the steel console framework, locate the socket that matches the power cable plug and connect the power cable to it. Note: Be sure that the latch on the plug clicks into place on the socket. The following illustration shows how the cable should look once it is installed.
45 Installing the Console Completing the Console Installation (P80) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed any extra cable back into the treadmill fairing. 2.
46 Assembling and Maintaining TRM 800-Series Treadmills Positioning the Console (P30 and P10) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you line up the back plate on the console with the console mount, you must make sure that the console cable assembly passes correctly through the openings in both components.
Installing the Console 47 Connecting Cables (P30 and P10) Important: Pass all cables through the semicircular opening just above the console mount, as shown in the following figure. Do not attempt to route any cables through other openings or through the steel channel above the mount.
48 Assembling and Maintaining TRM 800-Series Treadmills After the console has been seated, separate the individual cables out of the end of the console cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Important: All cables must pass through the opening in the center of the console mount.
49 Installing the Console Table 3.
50 Assembling and Maintaining TRM 800-Series Treadmills Completing the Console Installation (P30 and P10) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the installation: 1. Feed any extra cable back into the treadmill fairing. 2.
51 Installing the Console 4. Line up the two small tabs at the bottom of the console’s back cover with the slots at the bottom of the console case. Insert the tabs into the slots. 5. Insert the two #8–32 × ¹ ₂-inch Phillips-head screws that you removed earlier into the holes at the top edge of the console’s back cover. Tighten the screws fully.
52 Assembling and Maintaining TRM 800-Series Treadmills 4. Repeat steps 2 and 3 to install the other access cover, then tighten all four screws securely using a ⁵ ₃₂-inch hex wrench. Figure 31: Access panel attachment 5. Insert the edge of the rear cover into the lower edge of the fairing. Lift the cover until it is possible to insert two ¹ ₄-inch × ³ ₄-inch self-tapping panhead screws into the bottom two screw holes and partially tighten them.
53 Installing the Console 6. Fit the rear cover into place. Secure it using four ¹ ₄-inch × ³ ₄-inch self-tapping panhead screws. Figure 33: Rear cover attachment Important: Make sure that all of the edges of the rear cover are seated correctly and are flush with the surrounding panels before you tighten the cover’s mounting screws. 7. Tighten all six rear cover screws using a #3 Phillips screwdriver. Plugging In the Power Cord CAUTION: Use the supplied power cord.
54 Assembling and Maintaining TRM 800-Series Treadmills Checking Treadmill Alignment and Adjusting the Running Belt Before you allow anyone to use the treadmill, you must check the alignment of the running belt and adjust it as needed. For more information, refer to Checking the Alignment of the Running Belt and Adjusting the Running Belt in the Maintenance chapter. Breaking In the Equipment Precor equipment does not require an actual break-in period.
Installing the Console 55 Verifying That the Heart Rate Display Is Operational To verify that the heart rate display is operational: 1. Begin exercising on the equipment. 2. Grasp both touch-sensitive handlebars. Note: The heart rate is read within ten seconds. During that time, the heart on the display flashes. You must maintain contact with both metal plates on each handlebar to ensure an accurate reading. 3. Look at the HEART RATE display.
56 Assembling and Maintaining TRM 800-Series Treadmills Testing Safety Features Before any exerciser uses the treadmill, verify that the stop switch, the STOP button, and the Auto Stop feature are all working correctly. To test the restart switch: 1. Start any workout on the treadmill. 2. Give the safety clip lanyard a slight tug. The restart switch should pop up and the treadmill should slow to a stop immediately. 3. Press the restart switch back into its normal position.
Chapter 3 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always disconnect the equipment from its power source before cleaning it or performing any maintenance tasks.
58 Assembling and Maintaining TRM 800-Series Treadmills Alternatively, you can clean the equipment with Athletix fitness equipment cleaning wipes (for more information, visit www.athletixproducts.com) CAUTION: Read and follow the manufacturer’s instructions, particularly dilution instructions, before using any cleaner on Precor fitness equipment.
59 Maintenance Reading the Active Status Light The active status light is located at the front edge of the treadmill hood, as shown in the following figure. The light is large enough and bright enough to allow you to check the condition of all your treadmills at a distance. Figure 34: Status light location During normal operation, the status light is a steady blue. It changes color and pattern if the treadmill’s electronic drive unit detects a mechanical or electrical problem.
60 Assembling and Maintaining TRM 800-Series Treadmills Table 4. Active status light appearances and their meanings Status light appearance Meaning Action required Steady (solid) blue The treadmill is None. operating normally and does not currently need maintenance. Pulsing blue The treadmill is due for Perform the needed scheduled maintenance maintenance, then reset (P80 console only), or the status light. the treadmill belt needs to be replaced (except for 230 V models).
61 Maintenance Weekly Maintenance Perform the following maintenance tasks every week: 1. 2. 3. 4. 5. 6. Elevate the tread to maximum incline, then turn off the power switch or circuit breaker and unplug the unit from the wall outlet. Clean the floor under the equipment using a vacuum cleaner or a damp mop. When the floor is completely dry, reconnect the power and return the treadmill to the level position.
62 Assembling and Maintaining TRM 800-Series Treadmills Monthly Maintenance Perform the following maintenance tasks every month: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Turn off the power switch or circuit breaker, then unplug the unit from the wall outlet. Inspect the running bed and belt for wear. Clean the treadmill’s frame using a cloth moistened with water or an approved cleaner. Use water and a soft nylon scrub brush to clean the outer surface of the running belt.
63 Maintenance Checking the Alignment of the Running Belt Proper alignment allows the belt to remain centered and ensures smooth operation. Realigning the belt takes a few simple adjustments. If you are unsure about this procedure, call Precor Customer Support (refer to Obtaining Service). Caution: Do not adjust the running belt when someone is standing on it. To check the alignment of the running belt: 1. Make sure that the running surface is as level as possible.
64 Assembling and Maintaining TRM 800-Series Treadmills Adjusting the Running Belt If you are unsure about adjusting the running belt, call Precor Customer Support (refer to Obtaining Service). CAUTION: Take special care when aligning the running belt. Turn OFF the treadmill while adjusting or working near the rear roller. Do NOT wear loose clothing or allow your hair to hang loose during this procedure. Do NOT adjust the running belt when someone is standing on it.
65 Maintenance Storing the Chest Strap If you purchased the optional heart rate chest strap, store it in a place where it remains free of dust and dirt (for example, in a closet or drawer). Be sure to protect the chest strap from extremes in temperature. Do not store it in a place that may be exposed to temperatures below 32° F (0° C). To clean the chest strap, use a sponge or soft cloth dampened in mild soap and water. Dry the surface thoroughly with a clean towel.
66 Assembling and Maintaining TRM 800-Series Treadmills Long-Term Storage If you do not expect anyone to use the equipment for a long time, perform the following tasks to prepare it for storage: Turn it OFF. If it has a power cord, disconnect the cord. If it has an optional power adapter, connect the adapter to prevent damage to the internal battery. Position it so that it will not become damaged and will not interfere with people or other equipment.
Chapter 4 Treadmill Safety Features Before allowing users on Precor equipment, review the in this manual. You should also teach your patrons how to use the equipment safely, according to the guidelines on. Entering the Safety Code When the equipment is shipped from the factory, safety code protection is not active. After you have activated the safety code, you must inform your patrons that the equipment requests a safety code to prevent unauthorized use.
68 Assembling and Maintaining TRM 800-Series Treadmills Using the Treadmill Safety Clip The treadmill is equipped with three different stop functions, which behave as follows: If the user … Then the treadmill belt … And the console … Slows to a stop Pulls on the lanyard attached to the safety clip and trips the restart switch Shows the words PUSH THE RESET SWITCH. On some console models, an arrow points toward the Restart switch.
Treadmill Safety Features 69 Instruct users on how important it is to use the safety clip while exercising on the treadmill, and demonstrate how they should attach it to their clothing near the waistline. If the restart switch trips during exercise, perform the following steps: 1. Reattach the safety clip if necessary. 2. Press the restart switch down until it clicks, returning it to its normal position. Note: If the restart switch trips, all information about the current workout is deleted. 3.
70 Assembling and Maintaining TRM 800-Series Treadmills Tip: The small, flexible tab underneath the restart switch is designed for storage of the safety clip. When the treadmill is not in use, attach the safety clip to the tab as shown in the following figure.
Treadmill Safety Features 71 Turning the Treadmill On and Off To turn the treadmill ON and OFF, use the power switch located beneath the hood, near the power cord receptacle. Important: When the treadmill is not being used, turn it OFF. Weight Limit Do not use the treadmill if you weigh more than 400 pounds (180 kg). If you weigh more than 350 pounds (160 kg), do not run on the treadmill.
72 Assembling and Maintaining TRM 800-Series Treadmills Location The area around the treadmill must remain open, and free of interference from objects such as other equipment, at all times. In addition, for user safety and proper maintenance, an area three feet (one meter) wide by six feet (two meters) long must remain open and free of interference directly behind the running belt.
Assembling and Maintaining TRM 800-Series Treadmills Precor Incorporated 20031 142nd Avenue NE P.O.
