Owner`s manual

Opeartion and Maintenance Guide: Using the Integrated Controller to Set Up Custom Features 10
3. To enable this feature, specify the desired channel using the 0–9
keys on the keypad. Then, press the Mute button on the
integrated controller. The specified channel appears on the
screen.
The integrated controller stores the channel in memory. The PVS
screen returns to normal viewing mode and the green LED stops
flashing.
4. To disable this feature, press the Mute button without pressing
any number keys.
Power-Up Channel Setup
This feature lets you determine what channel appears when the PVS
screen is turned on. Your fitness facility can offer an in-house
channel or special informative channel when the Power-Up Channel
feature is enabled.
To set up this feature, you must use the 0–9 keys on the display
console keypad. This means that power must be supplied by the
exercise equipment. The optional power adapter is a useful tool for
self-powered equipment.
1. Supply power to the exercise equipment.
2. Press the Channel ▲ and Volume ▲ buttons simultaneously until
the green LED begins flashing (3 seconds). The flashing LED
indicates that the PVS screen has entered Program Device
mode.
Note: If you do not press a button within 15 seconds, the PVS
screen will return to normal viewing mode.
3. To enable this feature, specify the desired power-up channel
using the 0–9 keys on the keypad. Then press the Power button
on the integrated controller. The specified channel appears on
the screen.
The integrated controller stores the channel in memory. The PVS
screen returns to normal viewing mode and the green LED stops
flashing.
4. To disable this feature, press the Power button without pressing
any number keys.
Quick Reference
Once you are familiar with setting up the customized Cardio Theater
features, you may find the following table useful as a quick reference.
Remember these features can only be set up using the integrated
controller.
Table 1: Quick reference to customized features
Action
Automatic Power
On/Off Feature
Closed Caption
On/Off Feature
Standby Channel
Feature
Power-Up
Channel Feature
Access
feature
Press both
Channel ▲ and
Volume ▲
Press both
Channel ▲ and
Volume ▲
Press both
Channel ▲ and
Volume ▲
Press both
Channel ▲ and
Volume ▲
Enable Channel ▲ Volume ▲ Specify
channel with
0
–9 keys, then
press Mute
button
Specify
channel with
0–9 keys, then
press Power
button
Disable Channel ▼ Volume ▼ Press Mute
button only
Press Power
button only