Owner`s manual

Opeartion and Maintenance Guide: Using the Integrated Controller to Set Up Custom Features 9
Closed Caption On/Off Setup
With this feature, Closed Captioning (CC1 standard) displays on
the screen when headphones are not plugged into the headphone
jack. Closed Captioning stops displaying on the screen when
headphones are inserted into the jack. This feature gives people the
choice of using headphones to hear the TV program or not using
headphones but simply reading the captioning.
Note: When this feature is enabled, people will see the PVS menu
appear briefly while the preprogramming automatically turns the
feature on or off.
Important: This feature uses preprogramming that moves through
several layers of the PVS menu. To make sure that this feature
works properly, you must not change the PVS programming for
Closed Captioning. You cannot use CC2 standard with this feature.
If you enable this feature, do not enable the Automatic Power On/Off
feature. The Automatic Power On/Off feature turns off the screen
when headphones are not plugged into the headphone jack.
This procedure uses the integrated controller only.
1. Press the Channel ▲ and Volume ▲ buttons simultaneously until
the green LED begins flashing (3 seconds). The flashing LED
indicates that the PVS screen has entered Program Device
mode.
Note: If you do not press a button within 15 seconds, the PVS
screen will return to normal viewing mode.
2. Choose one based on what you want to do:
• To enable the feature, press the Volume ▲
• To disable the feature, press the Volume ▼
As soon as you press a button, the PVS screen returns to normal
viewing mode. If you enabled the feature, the green LED flashes
slowly. Otherwise, if the feature is off, the green LED remains
illuminated.
Standby Channel Setup
This Standby Channel feature defaults to a specific TV channel or
welcome screen when no headphones are connected. When this
feature is enabled and when a person disconnects from the
headphone jack, the screen changes to the standby channel.
If you enable this feature, do not enable the Automatic Power On/Off
feature. The Automatic Power On/Off feature turns off the screen
when headphones are removed.
To set up this feature, you must use the 0–9 keys on the display
console keypad. This means that power must be supplied by the
exercise equipment. The optional power adapter is a useful tool for
self-powered equipment.
1. Supply power to the exercise equipment.
2. Press the Channel ▲ and Volume ▲ buttons simultaneously until
the green LED begins flashing (3 seconds). The flashing LED
indicates that the PVS screen has entered Program Device
mode.
Note: If you do not press a button within 15 seconds, the PVS
screen will return to normal viewing mode.