Owner`s manual

Opeartion and Maintenance Guide: Using the Integrated Controller to Set Up Custom Features 8
Using the Integrated Controller to Set Up Custom Features
Cardio Theater has customized a number of features that are
commonly used in a fitness facility. The customization allows you to
easily enable or disable a feature using the integrated controller. Use
of these features is optional.
• Automatic Power On/Off feature causes the PVS screen to turn
off automatically when headphones are removed and turn on when
headphones are inserted.
• Closed Caption On/Off feature causes the screen to display
Closed Captioning (CC1 standard) when no headphones are
connected. This feature does not work when the Automatic Power
On/Off feature is enabled.
• Standby Channel feature sets the PVS so it displays a specific
channel when no headphones are connected. You might use this
feature to display a TV channel guide, facility welcome screen, or
default channel. This feature does not work when the Automatic
Power On/Off feature is enabled.
• Power-Up Channel feature lets you specify a channel that will
appear whenever the screen is turned on. You might use this
feature if you offer an in-house channel.
This section provides instructions for setting up each of these
features. At the end of this section, you will find a table that provides
a quick reference to the buttons you press. Once you are familiar
with setting up these features, you may find the table is all you need.
Important: You must use the integrated controller to set up these
features. A remote control accesses the standard PVS features, not
the customized Cardio Theater features.
Automatic Power On/Off Setup
The Automatic Power On/Off feature turns the PVS screen on
automatically when headphones are inserted into the headphone
jack. At the end of the exercise session, when the headphones are
disconnected from the jack, the screen turns off after a period of
time. This feature is typically used to conserve power and lengthen
screen life.
If you enable this feature, do not enable the Closed Caption On/Off
feature. The Closed Caption feature requires the screen to stay on
when headphones are not plugged into the jack.
This procedure uses the integrated controller only.
1. Press the Channel ▲ and Volume ▲ buttons simultaneously until
the green LED begins flashing (3 seconds). The flashing LED
indicates that the PVS screen has entered Program Device
mode.
Note: If you do not press a button within 15 seconds, the PVS
screen will return to normal viewing mode.
2. Choose one based on what you want to do:
• To enable the feature, press the Channel ▲
• To disable the feature, press the Channel ▼
As soon as you press a button, the PVS screen returns to normal
viewing mode. If you enabled the feature, the green LED flashes
slowly. Otherwise, if the feature is off, the green LED remains
illuminated.