Operation Manual

Setting Up the Console 27
Product Value Information provided
All UPPER BASE
SW PART
NUMBER
Displays the upper base application
software version.
All LOWER BASE
SW PART
NUMBER
Displays the lower application
software version.
All METRICS
BOARD
Displays the software number on the
Metrics Board.
All SERIAL
NUMBER
Displays the model and type of
equipment.
All USAGE LOG • Displays the number of times
each workout has been used and
displays the associated
cumulative minutes.
• Displays the user preferences in
workout selection.
All ERROR LOG Displays any event codes that may
have been detected by the software.
For more information, refer to Event
Log.
Event (Error) Log
This log holds a maximum of 30 events. After the log reaches
30 events, older events are erased to make room for newer
ones. To clear an event from the log, press and hold the Quick
Start key while the event is displayed.
The event log (sometimes referred to as an error log)
contains the following information:
 Event number
 Odometer value when the event occurred
 Hour meter value at the time the event occurred
 Current drawn by the motor and available voltage when
the event occurred (treadmill only)