Operation Manual

26 Operating and Maintaining the P10 Console
Use the following table to set up customized Informational
Display values.
Table 3. Informational Displays values
Product Value Information provided
All ODOMETER Correlates to the type of equipment
and the standard of units, U.S. or
Metric, selected in the programs.
• Treadmill and AMT: Displays the
number of cumulative miles or
kilometers logged to date. In
addition, the AMT displays the
number of vertical strides.
• EFX: Displays the number of total
strides logged to date.
• Bike: Displays the number of total
revolutions logged to date.
AMT BELT USAGE • Belt Stride Count: Tracks the
number of strides on equipment.
• Stride Count Reset: Reset
increases by one each time a
reset is performed.
• Odometer at Last Reset: Records
the odometer reading at the time
the belt was changed. The
equipment odometer continues to
count forward after the belt
change.
All HOUR METER Displays the number of hours that the
equipment has been in use.
Note: The equipment tracks the
elapsed minutes, but the value that
appears is truncated to the nearest
full hour.
Treadmill BELT RATING Displays the condition of the
treadmill’s running belt as a number
between 0 and 10. If the rating is 0 or
1, you should replace the belt.
All UPPER BOOT
SW PART
NUMBER
Upper board application software
part number and version.