Home Bench Strength-Training Fitness Equipment Assembly Instructions
Important Safety Instructions Before beginning any fitness program, consult your physician and receive a thorough physical examination. Il est conseillé de subir un examen médical complet avant d’entreprendre tout programme d’exercise. Si vous avez des étourdissements ou des faiblesses, arrêtez les exercices immédiatement. • • • • Read all instructions before using the equipment. These instructions are written to ensure your safety and to protect the unit.
Home Bench Assembly Instructions Table of Contents Important Safety Instructions ................................................................................................... 3 Personal Safety During Assembly ........................................................................................... 3 Obtaining Service .................................................................................................................... 3 1 2 Before You Begin ..........................................
Home Bench Assembly Instructions 1 Before You Begin Thank you for purchasing the Precor Home Bench. This unit is part of the Precor Strength line of quality strength training machines, which let you target specific muscle groups to achieve better muscle tone and overall body conditioning. To maximize your use of the equipment, please study this guide thoroughly. Unpacking the Equipment The Home Bench is carefully tested and inspected before shipment.
Home Bench Assembly Instructions 2 Preparations You must review and follow the instructions in this guide. If you do not assemble and use the Home Bench according to the following guidelines, you could void the Precor Limited Warranty. Installation Requirements Assembly Tips Follow these installation requirements when assembling the unit: • • Fill out and mail the warranty registration card. • Set up the Home Bench on a solid, flat surface.
Home Bench Assembly Instructions 3 Assembly Instructions Assembly of the Home Bench takes professional installers about ½ hour to complete. If this is the first time you have assembled this type of equipment, plan on significantly more time. Professional installers are highly recommended! However, if you acquire the appropriate tools, obtain assistance, and follow the assembly steps sequentially, the process will take time, but is fairly easy.
Home Bench Assembly Instructions 1. Attach Wheel Crossbar Use wire tie cutters to open the box. A Wheel Crossbar 2 - 2¹⁄₂" hex head bolts 4 - washers 2 - locknuts A. Attach the Wheel Crossbar to the Base Support using two 2¹⁄₂-inch hex head bolts four washers two locknuts Finger tighten Base Support 1 Step 1.
Home Bench Assembly Instructions 2. Install Seat and Back Pads Seat Pad A. Place the Seat Base in the up position. B. Attach the Seat Pad using two 2¹⁄₂-inch hex head bolts two washers Finger tighten. Seat Base Note: To ease installation, tilt the rear bolt through the mounting hole and thread the bolt into the seat pad. Insert the front bolt and finger tighten. Push the seat forward to make room for the back pad. C. Align the Back Pad.
Home Bench Assembly Instructions Notes: page 10
Home Bench Assembly Instructions Notes: page 11
Precor Residential Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. Limited Warranty. Precor Incorporated warrants all new Precor products to be free from defects in materials and manufacture for the warranty period set forth below. The warranty period commences on the invoice date of original purchase.
RET. Precor Incorporated 20031 142nd Avenue NE PO Box 7202 Woodinville, WA 98072-4002 PLACE STAMP HERE Thank You and Welcome to Precor To allow us to serve you better, please take a few moments to complete and return your warranty registration. YOU MAY ALSO REGISTER ONLINE AT www.precor.com/warranty If you have questions or need additional information, contact your local dealer or call Precor Customer Support at 800-347-4404. Fold along dotted line and tape closed before mailing.
Month Day Year Last Name Zip Code Apt./Suite: The serial number is located on the shipping box and on the product.
Home Bench Specifications Length: 52.5 inches (133 cm) Height: 16.5 inches (42 cm) Width: 24 inches (61 cm) Shipping weight: 55 lb (25 kg) Precor Incorporated 20031 142nd Avenue NE P.O. Box 7202 Woodinville, WA USA 98072-4002 Precor and Pacific Fitness are registered trademarks of Precor Incorporated. Specifications subject to change without notice. Copyright 2005 Precor Incorporated. Precor web site: www.precor.
