Operation Manual

Chest Press Assembly Guide: Getting Started 3
Hardware Kit (not to scale)
The following pieces of hardware are provided on a shrink-wrapped card. Each part is labeled on the card for easy reference.
Table 1. Hardware kit contents
Fasteners Quantity
Socket head cap screw (M12 x 35 mm)
20
Flat washer (13 mm internal diameter)
20
Frame plug 4
Axle mount end 4
Set screw (M8 x 6 mm)
10
Hex head screw (⁵₁₆-inch x 1¹₂-inch)
8