Operation Manual

Biceps Curl Assembly Guide: Getting Started 3
Hardware Kit (not to scale)
The following pieces of hardware are provided on a shrink-wrapped card. Each part is labeled on the card for easy reference.
Table 1. Hardware kit contents
Fasteners Quantity
Buttonhead cap screw (M8 x 15 mm)
1
Socket head cap screw (M12 x 35 mm)
10
Socket head cap screw (M8 x 25 mm) 2
Flat head cap screw (M12 x 30 mm) 4
Flat head cap screw (M8 x 25 mm)
2
Hex head screw (⁵₁₆-inch x 38 mm)
6
Flat washer (13 mm internal diameter) 10
Flat washer (9 mm internal diameter) 7