Operation Manual

CW-813 Assembly Guide

page 5

Preparations

The CW-813 parts are inspected before shipment.

Each unit contains several pieces that require

assembly. You must obtain adult assistance during the

assembly process.

Unpacking the Equipment

When you open the boxes, carefully unpack the pieces

and lay them on the ﬂoor near the location where you

plan to use them.

CAUTION:Becarefulwhenyouremovethe

packagingmaterialwithautilityknife.Donot

scratchthepaint.

If any items are missing, contact the dealer from whom

you purchased the unit. For more information, refer to

Obtaining Service.

Required Tools

Tools that you need to obtain before assembling the

unit include:

❏ Wire cutter or utility knife

Installation Requirements

Follow these installation requirements when

assembling the unit:

• ReviewtheImportant Safety Instructions.

• Assembletheunitwhereitwillbeused.

Provide ample space around the unit.

• Installcomponentsinthesequenceshown.

• Insertallfastenersinthesamedirection.

For aesthetic purposes, insert all the fasteners

in the same direction unless speciﬁed (in text or

illustrations) to do otherwise.

• Leaveroomforadjustments. Tighten the

fasteners to keep the unit stable, but leave room

for adjustments. Do not fully tighten fasteners until

instructed to do so.