Operation Manual

Informational Displays
The equipment provides information about its use (odometer and hour meter), as well as software versions and part numbers, serial number,
usage log, and error log. In general, you would only access this information if directed to do so by Precor Customer Support.
To navigate through the informational displays, use the following flowchart. Descriptions for these displays are shown in the following table.
Note: The CLEAR key is located on the Number Keypad and the RESET key is located on the Navigational Keypad.
DIAGS INFORMATIONAL DISPLAY
HOUR METER
UPPER BASE SW PART NUMBER
UPPER BOOT SW PART NUMBER
SERIAL NUMBER
ODOMETER
SERIAL NUMBER NONE
USAGE LOG
PROGRAM
ERROR LOG
ERRORS
ERROR
HOLD TO
CLEAR ERRORS
PRECOR
STRIDE DIAL SW PART NUMBER
METRICS BOARD SW PART NUMBER
LOWER BASE SW PART NUMBER
RESET, 6, 5
OK
CLEAR
###
OK
CLEAR
###
OK
CLEAR
#####-###
OK
CLEAR
#####-###
OK
CLEAR
#####-###
OK
CLEAR
#####-###
OK
CLEAR
#####-###
OK
CLEAR
OK
CLEAR
CLEAR
CLEAR
OK
OK
QUICKSTART
#
Product Owner's Manual: Club Features 15