Datasheet

Form
General Data
Form A
1)
Industrial
Type B
Form B
1)
Micro Type C Form C
1)
Operating voltage – versions without circuit UC max. 250 V UC max. 110 V UC max. 250 V
Operating voltage – versions with circuit See circuit versions, page 28 - 32
Nominal current
2)
10 A 6 A
Contact resistance ≤4 mOhm
Cable diameter 5-10 mm 5-6 mm
Cross section of conductor with sleeve
3)
0.5-1.5 mm
2; 4
) 0.34-0.5mm
2
Cross section of conductor without sleeve
5)
0.5-1.5 mm
2
0.34-0.5mm
2
Degree of protection acc. to DIN EN 60529 IP65
Ambient temperature for versions with …
Housings in polyamide, black, grey, natural -25 C°- 125 C°
Housings in polyamide, transparent -25 C°- 60 C°
Housings with fire protection class V1 acc. to UL 94 -25 C°- 125 C°
Housings for explosion-proof areas -20 C°- 95 C°
Profile gasket or flat gasket in NBR -25 C°- 90 C°
Profile gasket or flat gasket in silicone -25 C°- 125 C°
Tightening torque for ...
Pressure screw max. 1.8 ±0.2 Nm max. 1.6 ±0.2 Nm
Central-fixing screw max. 0,4±0,1 Nm
Contact screw 0.2+0,1 Nm
Dimensions of central-fixing screw for ...
One-piece housing M 3x33.5 M 2.5x27
Two-piece housing M 3x37.5 ---
1) Acc. to EN 175301-803
2) Connectors with circuit in general 1.5 Va, except differently indicated, see page 28-32. Higher current versions upon request.
3) We recommend to assemble the flying leads in our connectors with sleeves acc. to VDE 0100/520.
4) The assembly of the 1.5 mm² flying leads with sleeve is only possible with our standard versions without wire protecting plate.
5) We recommend our special version with wire protecting plate for the assembly of the flying leads without sleeve.
6) LABS: Substances disturbing the wettability of varnish
Explosion-proof areas:
- in gas explosive areas of zone 2. They comply with category II3C and the ignition protection type EEx nA II.
- in areas of zone 22 with flammable dust. They comply with category II3D and degree of protection IP 65.
Materials
Housing in polyamide, black, grey, natural; cover black, grey
(for two-piece housings); terminal block for form A, Industrial Type B, form B
PA6 GF30
Housings in polyamide, transparent; transparent cover (for two-piece housings) PA6-I
Housings black; terminal block with fire protection class V1 acc. to UL 94 PA6 GF30 V0-equipped
Housings transparent, with fire protection class V1 acc. to UL 94 Polycarbonate V0-equipped
Housings for explosion-proof areas PA6 GF30 dry impact-resistant
Terminal block for Micro Type C, form C PA6.6
Pressure screw PA6 GF30
Contact CuZn, Sn/Cu-plated
Central-fixing screw, contact screw St, 4.8, zinc-plated
Pressure ring St, zinc-plated
Grommet; gasket; cover gasket NBR LABS-free 6) or silicone
Colours
RAL-code of the grey housing and the grey pressure screw RAL 7040 ”window grey”
Pressure screw for black and transparent housing black
Pressure screw for grey housing grey
Pressure screw for explosion-proof areas black or blue
NBR gasket black
Silicone gasket red
Indications on Usage
General Data
Materials
Colours
Hinweise bezüglich der Verwendung
– 8 –
– 8 –
– 9 –
Connectors
Connectors