Instructions / Assembly

4
(2) 1/2” Wrenches
(2) 3/4” Wrenches
Assembly Instructions
(2) 9/16” Wrenches
(1) 1/4” Allen Wrench
Remove from Carton
Remove and layout all parts and hardware packages from the carton. Identify them using the illustrations on
pages 2 and 3.
1. Place the Base Plate on a flat surface with the front facing away for you (the front will have three bolt
holes in the center). Insert the short side of the Axle into the Axle Hole to your left. Slide the Tow Bar onto
the Axle. Slide the Axle into the Axle Hole on the right side of the Base Plate. See Figure 1.
Figure 1
Tow Bar
Front
Base Plate
Axle
9
8. Attach the Handle Grip to the Handle. Insert the 5/16” x 1-3/4” Hex Head Bolt in to the top hole
in the Handle (from the right side as us are facing the unit), then through the top hole of the Lever
Link and secure with a 5/16” Nylock Nut. Attach the 5/16” Nylock Jam Nut to the 5/16” x 2-1/4” Hex
Head Bolt (leaving about 1/2” spacing at the top). Insert the bolt into the second hole of the Handle
(from the right as you are facing the unit), and the Lever Link, then secure with a 5/16” Hex Head
Nut. See Figure 8.
Figure 8
5/16” Jam Nylock Nut
5/16” x 2_1/4”
Hex Head Bolt
Lever Link
5/16” x 1-3/4”
Hex Head Bolt
5/16” Nylock Nut
Handle
Handle Grip
1/2” x 1-1/4”
Hex Head Bolt