Instructions / Assembly

2
Rules for Safe Operation
All power equipment can cause injury or property damage if operated improperly. Please read and observe
the following safety rules and exercise caution at all times when operating equipment.
 Read and understand your tractor owner’s manual and towing safety rules.
 Never allow children to operate the towing vehicle. Do not allow adults to operate the tractor without having read the owner’s
manual or receiving proper instruction.
 Do not allow anyone to ride or sit on tow behind equipment during operation.
 Keep people and animals at a safe distance.
 Always wear substantial footwear. Do not wear loose fitting clothing that may get caught in moving parts.
 This unit may have sharp points. Handle with care.
 Keep your eyes and mind on your vehicle/attachment and area being covered. Do not let yourself be distracted.
 Stay alert for holes in the terrain and other hidden hazards.
 Tractor braking and stability may be affected with the attachment of this unit. Be aware of changing conditions on slopes. Refer
to safety rules in your tractor owner’s manual concerning safe operation on slopes. Stay Off Steep Slopes.
 Always operate up and down a slope, never across the face of a slope.
 This equipment should be operated at a reduced speed on rough terrain, along creeks, ditches and on hillsides, to prevent
tipping and loss of control.
 Always begin with the transmission in first (low) gear and engine at low speed, gradually increasing speed as conditions permit.
 Keep the tractor and attachment in good operating condition and keep safety devices in place.
 Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
 The tractor and attachment should be stopped and inspected for damage after striking a foreign object. Any damage should be
repaired before restarting and operating the equipment.
 Follow the maintenance instructions as outlined in this owner’s manual.
 Do not exceed 3-4 miles per hour.
Carton Contents
10
9
7 6
5
4 3
2 1
8
12
11
11
Ref. Qty. Part# Description
1 1 5592GY Base Plate
2 1 5561GY Tow Bar
3 1 1243GY Clevis Plate
4 1 5576GY Handle
5 1 5593GY Axle Assembly
6 2 5568GY Wheel Bracket
7 1 4263G Lever Link
8 1 4240G Link Bar
9 9 4005GY Tine
10 1 5564GY Handle Brace
11 2 3150CR Wheels
12 1 3042 Handle Grip
13 2 4271 1/2” x 3” Hex Head Bolt
14 1 5583 1/2” x 1-1/2” Hex Head Bolt
15 1 1752 5/16” x 2-1/4” Hex Head Bolt
16 1 2051 5/16” x 1-3/4” Hex Head Bolt
17 2 4014 5/16” x 1-1/2” Hex Head Bolt
18 11 3738 5/16” x 1” Hex Head Bolt
Ref. Qty. Part# Description
19 5 1248 5/16” x 3/4” Hex Head Bolt
20 1 4011 1/2” x 1-3/4” Shoulder Bolt
21 1 1840 1/2” x 1-3/4” Clevis Pin
22 1 4272 Compression Spring
23 6 1506 1/2” Flat Washer
24 2 5589 1/2” Nylon Washer
25 1 1278 3/8” Flat Washer
26 9 2172 5/16” Fender Washer
27 14 1044 5/16” Flat Washer
28 2 4295 1/2” x 1” Spacer
29 14 1276 5/16” Lock Washer
30 1 1042 #14 Hitch Pin Clip
31 2 4324 1/2” Jam Nut
32 4 4327 1/2” Nylock Nut
33 6 1749 5/16” Nylock Nut
34 14 1275 5/16” Hex Head Nut
35 1 5590 3/8” Nylock Jam Nut (thin)
36 1 5591 5/16” Nylock Jam Nut (thin)
19
22
21
10
3
16
11
18
12
4
33
17
36
35
15
23
14
31
34
9
23
8
24
33
27
5
20
34
30
29
26
27
29
13
23
32
31
6
1
25
28
2
7
33