Instructions / Assembly

2
Rules for Safe Operation
The following safety precautions are suggested. This Sprayer is designed, engineered and tested to
offer reasonably safe and effective service, provided that it is operated in strict accordance with
these instructions. Failure to do so may result in personal injury. Always observe the rules of safe
operation. Please read and retain this manual.
Read and understand your tractor’s owner’s manual and towing safety rules, know how to
operate your tractor before using any attachment.
Do not allow anyone to ride or sit on tow behind equipment during operation.
Be alert for holes in the terrain and other hazards. This could cause you to lose control of the
cart and lawn tractor.
Follow maintenance and lubrication instructions as outlined in this manual.
Tractor braking and stability may be affected with the attachment of this unit. Be aware of
changing conditions on slopes. Refer to safety rules in your tractor owner’s manual concerning
safe operation on slopes. Stay Off Steep Slopes.
Always operate up and down a slope, never across the face of a slope.
Do not drive close to creeks, ditches or public highways.
Always wear substantial footwear. Do not wear loose fitting clothing that may get caught in
moving parts.
Avoid extremely sharp turns.
Follow the maintenance instructions as outlined in this owner’s manual.
Do not exceed maximum towing speed of 4 M.P.H.
Warning of danger of improper use of the Sprayer. This unit is intended for use only with
Riding Mowers or Garden Tractors. It is definitely not for Highway use, being pulled at high
speeds, or transporting passenger(s) of any sort. Such use could result in injuries for which we
cannot be held responsible.
1
3 4
2
Tank Assembly comes
attached to Frame
11
Ref
No.
Qty. Description Part No.
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
2
3
3
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
Wand Holder
Nozzle Cap
Suction Strainer
1/2” Rubber Hose 24”
3/8” MPT x 1/2” HB
10-24 x 1/2” Bolt
Tank Lid
Electric Pump Motor (1.8 w/Switch)
3/8”MPT x 1/4”MPT Nipple
Nylon Tee, 1/4” w/branch
1/4” MPT x 3/8” HB
3/8” Rubber Hose 15’
Sprayer Wand & Nozzle
1/4” MPT x 1/4” FPT Valve
1/4” MPT x 1/2” HB Hose Barb
1/2” Clear Hose 40”
Nylon Tee, 1/2”
1/2” Clear Hose 19-1/2”
11/16” MPS x 1/2” HB ELB HB w/nut
Nozzle 2.5” Blue
Boom Angle
Drain Cap w/Washer
11/16” MPT x 1/2” HB
Pressure Gauge
3784
3620
3619
3774
3603
3613
3601
3609
3728
3688
3731
3773
3658
3730
3729
3775
3723
3776
3725
3719
3724GY
3733
3764
3687
Ref
No.
Qty. Description Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
1
1
2
2
1
2
6
2
4
12
6
8
4
2
6
4
1
2
1
2
8
4
4
6
1
1
TCT Frame
Tank Assembly
Tow Bar Tube
Wheel
Clevis Pin 1/2” x3-1/2” 1” Head
5/16” x 2” Hex Head Bolt
5/16” x 3/4” Hex Head Bolt
1/4” x 3” Hex Head Bolt
1/4” x 2” Hex Head Bolt
1/4” Flat Washer
5/16” Flat Washer
5/16” Lock Washer
5/8” Flat Washer
Cotter Pin 1/8” x 3/4”
1/4” Nylock Nut
5/16” Hex Head Nut
Hitch Pin Clip
1” Tube Plug
5/16” Spacer
Clevis Plate
Hose Clamp (Stainless Steel)
10-24 x 1-1/4” Round Head Screw
#10 Flat Washer
#10 Lock Washer
Wire Harness
25 Gallon Sprayer Tank
5190GY
****
5191GY
2029
4289
4041
1248
2179
1086
1817
1044
1276
1646
5195
1558
1275
1042
3060
5153
4265G
3632
3604
3605
3636
3780
3626
32
41
21
23
22
34
25
33
48
24
50
35
38
21
37
36
40
30
21
31
39
26
27
Not all parts shown
21
30
21
49
29
28
44
47
42
29
43
21
45 45
46
28