Product Manual

2
Safety Instructions
All power equipment can cause injury or property damage if operated improperly. Please read and observe
the following safety rules and exercise caution at all times when operating equipment.
Read and understand your tractor owners manual and towing safely rules. Know how to operate your tractor before
using any attachment.
Never allow children to operate the towing vehicle. Do not allow adults to operate the vehicle without having read
the owners manual or without receiving proper instruction.
Do not allow anyone to ride or sit on tow behind equipment during operation.
Keep all people and animals at a safe distance.
Always wear substantial footwear. Do not wear loose fitting clothing that may get caught in moving parts.
Keep your eyes and mind on your tractor/attachment and area being covered. Do not let yourself be distracted.
Tractor braking and stability may be affected with the attachment of this unit. Be aware of changing conditions on
slopes. Refer to safety rules in your tractor owners manual concerning safe operation on slopes. Stay Off Steep
Slopes.
Always operate up and down a slope, never across the face of a slope.
This equipment should be operated at reduced speed(s) on rough terrain, along creeks and ditches and on hillsides,
to prevent tipping or loss of control.
Always begin with the transmission in first (low) gear and engine at low speed, and gradually increase speed as
conditions permit.
Keep the tractor and attachment in good operating condition and keep safety devices in place.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
The tractor and attachment should be stopped and inspected for damage after striking a foreign object. Any
damage should be repaired before restarting and operating the equipment.
Follow the maintenance instructions as outlined in this owners manual.
Should not be towed at more than 4 miles per hours.
The maximum recommended operating weight for this unit is 200 pounds.
Care must be taken with any weed killer, pesticide, or combination product. They can be harmful to other plant life
in the yard.
Carton Contents
1. Hitch Arm Assembly
2. Hopper Assembly
1
2
11
Parts and Support
Please do not return this product to the
store prior to contacting the number below.
At Precision Products Inc. our goal is to deliver quality, value and outstanding service. If for any reason our
product does not meet your expectations, please contact us and we will take care of any problem you may
have with this unit.
When ordering replacement parts please have the model number, part description, part number, inspector
number and date on box, available so that we can best serve you.
1 (800) 225-5891
www.precisionprodinc.com
Precision Products Inc.
316 Limit St.
Lincoln IL 62656
STOP
Ref
No.
Qty. Description Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
1
1
1
2
1
2
1
1
1
1
1
1
1
2
2
6
12
1
1
1
1
2
1
3
Hopper
Wrap Around
Cross Brace
Control Handle
Hitch Arm
Spread Adjustment Plate
Wheel
Control Housing
Control Rod
Tractor Spring Extension
Spinner Disc
Vinyl Handle Cap (for Slide Plate)*
Spreader Slide Plate Handle
Slide Plate
Clevis Plate
Side Bracket
5/16” x 3” Hex Head Bolt
5/16” x 2” Hex Head Bolt
Rain Cover
1/4” x 1” Hex Head Bolt
Carr Bolt 1/4 x 3/4
1/4” x 1-1/2” Hex Head Bolt
1/4” x 1/2” Hex Head Bolt
Wing Nut
1/4” x 3/4” Hex Head Bolt
(Stainless Steel)
2155BLK
2151R
2154R
635R
2152
2167
2197
603R
637B
704TS
2614
2166
2169
2168
4265R
2153
2173
4041
2170
1061
1416
1643
1647
2828
1643SS
*Not all parts shown.
Ref
No.
Qty. Description Part No.
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
53
56
57
58
1
1
29
2
3
1
6
2
1
20
4
2
1
1
4
2
1
2
1
1
1
1
1
3
3
2
1
1
1
1
E—Clip
Axle
5/16” Flat Washer
Hex Head Nut 5/16”
1/4” Fender Washer
Gear Case Assembly
1/4” Flat Washer
5/8” Flat Washer
Indicator
5/16” Nylock Nut
1/4” Nylock Nut
1/8” x 11/4” Cotter Pin
Agitator Pin
Spinner Shaft Bushing
1” Square Tube Plug
5/16” x 5/16” Rubber Roller
#14 Hitch Pin Clip
Axle Bearing
1/2” x 31/2” Clevis Pin
3/4 x 2” Handle grip
Clevis Pin 1/4” x 15/8”
#213 Hitch Pin Clip
Strainer (Not Shown)*
1/4” Flat Washer (Stainless Steel)
1/4” Nylock Nut (Stainless Steel)
Spacer 3/8” x 3/8 12Ga
Washer 1/4 Nylon Fender
Compression Spring
HH Bolt 5/1618 x 3 Grade 8
HH Bolt Full Thread 5/16 x 3 G5
2175
2190
1044
1275
6143SS
2149
1817
960
705TI
1749
1558
1262
2148PU
2160
2176
2178
1042
2150
4289
709T
2198
2189
2171B
1817SS
1558SS
3254
5068
2157MOD
1644
9229
TBS7019