Instructions / Assembly
2
Safety Instructions
All power equipment can cause injury or property damage if operated improperly. Please read and observe
the following safety rules and exercise caution at all times when operating equipment.
Read and understand your tractor owner’s manual and towing safety rules. Know how to operate your tractor before using any
attachment.
Never allow children to operate the towing vehicle. Do not allow adults to operate the vehicle without having read the owner’s
manual or receiving proper instruction.
Do not allow anyone to ride or sit on tow behind equipment during operation.
Keep people, children and animals at a safe distance.
Always wear substantial footwear. Do not wear loose fitting clothing that may get caught in moving parts.
This unit may have sharp points. Handle with care.
Keep your eyes and mind on your vehicle/attachment and area being covered. Do not let yourself be distracted.
Stay alert for holes in the terrain and other hidden hazards.
Tractor braking and stability may be affected with the attachment of this unit. Be aware of changing conditions on slopes. Refer
to safety rules in your tractor owner’s manual concerning safe operation on slopes. Stay Off Steep Slopes.
Always operate up and down a slope, never across the face of a slope.
This equipment should be operated at reduced speed(s) on rough terrain, along creeks and ditches and on hillsides, to prevent
tipping or loss of control.
Do not operate close to creeks, ditches or public highways.
Always begin with the transmission in first (low) gear and engine at low speed, and gradually increase speed as conditions
permit.
Keep the vehicle and attachment in good operating condition and keep safety devices in place.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
The vehicle and attachment should be stopped and inspected for damage after striking a foreign object. Any damage should be
repaired before restarting and operating the equipment.
Follow the maintenance instructions as outlined in this owner’s manual.
Should not be towed at more than 4 miles per hours.
Carton Contents
1
5
2
4
6 9 10
3
12
11 8 7
14 13 16 15
15
TA500
Parts and Support
Please do not return this product to the
store prior to contacting Precision.
At Precision Products Inc. our goal is to deliver
quality, value and outstanding service. If for any
reason our product does not meet your
expectations, please contact us and we will take
care of any problem you may have with this unit.
When ordering replacement parts please have the
model number, part description, part number,
inspector number and date on the box, available so
that we can best serve you.
1 (800) 225-5891
www.precisionprodinc.com
Precision Products Inc.
316 Limit St.
Lincoln IL 62656
STOP
35
4327 4 1/2” Nylock Nut
36
1275 9 5/16” Hex Head Nut
37 4324 2 1/2” Jam Nut
38
5591 2 5/16” Nylock Jam Nut (thin)
39
5590 1 3/8” Nylock Jam Nut (thin)
40 4272 1 Compression Spring
41 4024 2 Spring (Axle)
42 4051 3 Bushing 3/4” (Axle)
22
4014 2 5/16” x 1-1/2” Hex Head Bolt
23
2051 1 5/16” x 1-3/4” Hex Head Bolt
24 1752 1 5/16” x 2-1/4” Hex Head Bolt
25
4011 1 1/2” x 1-3/4” Shoulder Bolt
26
1840 1 1/2” x 1-3/4” Clevis Pin
27 1264 26 3/4” Flat Washer
28 1506 5 1/2” Flat Washer
29 1278 1 3/8” Flat Washer
30 1044 2 5/16” Flat Washer
31 1276 9 5/16” Lock Washer
32 1042 1 #14 Hitch Pin Clip
33 5589 2 1/2” Nylon Washer
34 1749 7 5/16” Nylock Nut
No. Part No. Qty. Description
1 4020GY 1 Base Plate
2 5864GY 1 Tow Bar
3 5870 1 Axle
4
5865GY 1 Handle
5
5568GY 2 Wheel Bracket
6 5869GY 1 Center Plate
7 4019GY 2 End Plates
8 5866GY 1 Handle Brace
9 4263G 1 Lever Link
10 4240G 1 Linkage Bar
11 1243GY 1 Clevis Plate
12 4025GYOS 11 Aerator Blade
13 3150CR 2 Wheel
14 3042 1 Handle Grip
15 4470 9 1” x 3” Spacer
16 4029GY 2 1’ x 2” Spacer
17 4271 2 1/2” x 3” Hex Head Bolt
18 5583 1 1/2” x 1-1/2” Hex Head Bolt
19 1248 9 5/16” x 3/4” Hex Head Bolt
20 3738 2 5/16” x 1” Hex Head Bolt
21 4281 1 5/16” x 1-1/4” Hex Head Bolt
17