Product Manual

4
Figure 2
2. Attach Handle Assembly to the outside of the Leg. Using four 1/4” x 2-1/2” Hex Head Bolts, attach a 1/4” Flat
Washer to each bolt insert through the Handle then through the Leg, place another 1/4” Flat Washer onto each
bolt and secure with a 1/4” Nylock Nut. See Figure 2.
Handle Assembly
Leg
1/4” x 2.5 HH Bolt &
1/4” Flat Washer
1/4” Nylock Nut
3. Secure the Upper Rod to the Adj Tab by putting one 1/4” Hex Nut onto Upper Rod
then putting upper Rod through Adj Tab and secure with another 1/4” Hex Nut. Se-
cure other end of Upper Rod to Slide Plate using a 1/4” Nylock Nut. See Figure 3.
Figure 3
Slide Plate
1/4” Nylock Nut
Upper Rod
Adj Tab
1/4”
Hex
Nut
Upper Rod
7
Ref
No.
Qty. Description Part No.
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
1
1
25
2
2
1
1
1
19
1
2
1
1
1
2
8
6
8
1
1
11
2
1
1
4
1
1
Control Rod Galvanized
Agitator Stainless
1/4” Nylock Nut
5/8” Wheel Bushing
1” Tube Plug *
5/8” Flat Washer
Cotter Pin 1/8” x 1-1/4”
3/8” Retaining Ring
1/4” Flat Washer
Rain Cover*
1” x 4” Handle Grip
Foam Grip 1” x 2-3/4”
Wing Nut
Thumb Screw 1/4” x 1”
1/4” Hex Head Nut
1/4” x 3/4” HH Bolt Stainless
1/4” Nylon Washer
1/4” Nylock Nut Stainless
1/2” x 3/8” Nylon Bushing
3/8” Nylock Nut Thin Jam SS
1/4” x 2.5” HH Bolt
Rubber Roller 5/16” ID x 5/16”
1/4” x 3/4” HH Bolt
1/4” x 1/2” HH Bolt
1/4” x 1.75” HH Bolt
1/4” x 2” HH Bolt
1/4” x .5” HH Bolt
6555GV
6507SS
1558
6214
3060
1646
1262
2174
1817
2906
3042
6537
2828
6544
1270
1643SS
6505
1558SS
6538
5590SS
2385
2178
1643
1647
6129
1086
1647
Ref
No.
Qty. Description Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
Hopper
Gear Case Assembly
Spinner Disc
Left Handle
Right Handle
Leg
Wrap Around Support
Strainer *
Number Pad
Wheel
Upper Adj Handle
Adj Handle Tab
Slide Plate Support Tab SS
Slide Plate Stainless
Pressure Plate Stainless
Axle 24”
6506JD
6543-19
2614
3924R
3925R
3926TB
6551R
3882B
6523
3498
6524B
6525B
6502SS
6504SS
6503SS
7131P
Parts and Support
Please do not return this product to the
store prior to contacting Precision.
At Precision Products Inc. our goal is to deliver quality, value and outstanding service. If for any reason our
product does not meet your expectations, please contact us and we will take care of any problem you may
have with this unit.
When ordering replacement parts please have the model number, part description, part number, inspector
number and date on the box, available so that we can best serve you.
1 [phone]
www.precisionprodinc.com
Precision Products Inc.
316 Limit St.
Lincoln IL 62656
STOP
Not all parts shown.