User's Manual
TROUBLESHOOTING - continued
Problem Situation Action
Receiver and/or
controller power
LEDs do not
illuminate when the
vehicle is put into
reverse
Sensor system wires are loose or improperly
connected
Ensure all wires are correctly
connected to the receiver,
controller, sensors and into the
vehicle reverse light circuit.
Check all wire connections and
splices for proper connection.
Receiver always
indicates an object
behind the vehicle
(green, yellow or red
LEDs on)
The sensors are mounted incorrectly or have
moved
The sensors may be located
too low or pointed downward,
therefore detecting the ground
or other object. Check sensor
location and alignment. Realign
as necessary.
The sensors are covered with snow, mud,
ice, etc.
Clean sensors.
Receiver power LED
(green) illuminates
but does not detect
any obstacles
Sensor system wires are loose or improperly
connected
Ensure the sensor system wires
and connectors are properly
inserted into the controller’s 2-pin
receptacle.
Receiver does not
indicate correct
distances
The sensors are mounted incorrectly or have
moved
Check sensor location and
alignment. Realign as necessary.
LIMITED WARRANTY
Manufacturer warrants to the original consumer, or purchaser, that the PEAK® PKC0RE Back-Up
Sensor System will be free from defects in material and workmanship for ninety (90) days from the
date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and all other
IF YOUR PEAK® MALFUNCTIONS DUE TO A DEFECT IN MATERIALS
AND WORKMANSHIP WITHIN THE NINETY (90) DAY WARRANTY PERIOD, MANUFACTURER
WILL, AT ITS ELECTION REPAIR OR REPLACE IT. MANUFACTURER SHALL NOT, HOWEVER,
BE RESPONSIBLE FOR ANY DAMAGE TO YOUR PRODUCT DUE TO ANY CAUSE OTHER THAN
DEFECTS IN MATERIAL OR WORKMANSHIP, INCLUDING WITHOUT LIMITATION: FAILURE
TO FOLLOW INSTRUCTIONS FOR USE; MISUSE; REPAIRS BY AN UNAUTHORIZED PERSON;
MISHANDLING; MODIFICATIONS; NORMAL WEAR AND TEAR; ACCIDENT OR OVERLOAD.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. MANUFACTURER SHALL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED
WARRANTY ON THIS PRODUCT OR BASED ON ANY OTHER CAUSE OR CLAIM.
To Obtain Service:
Before returning this product for any reason, please call toll free (800) 477-5847.1.
Do not return your PEAK® product to the place of purchase for service. Send your unit, postage 2.
prepaid and insured, along with a copy of the original sales receipt and a phone number to the
address below. Pack your unit properly, as we are not responsible for any damage caused during
shipping.
Old World Industries, Inc.
c/o Technical Services
4065 Commercial Avenue
Northbrook, IL 60062
A copy of the original receipt is required for warranty service. If no receipt is provided, the unit 3.
manufacturer’s date will be used as the date of purchase.
© 2010 Old World Industries, Inc., Northbrook, IL 60062
MADE IN CHINA
www.peakauto.com