User Manual
OPERATION
1. While driving in reverse, a beep will sound and a green LED will light up when an object is 5 feet
(1.5 m) away. If the object is more than 5 feet (1.5 m) away, there will be no sound and the LED
will not light up.
2. As you get closer to an object, the beeping speed will increase and additional LED lights will light
up.
When all LEDs are lit and the alarm is a constant sound, stop the vehicle
immediately. Continuing in reverse may damage vehicle or wireless parking sensors.
3. When you are 1.3 feet (0.4 m) or closer, both green, both yellow and the red LEDs will light and
the beep will be a constant sound.
4. The volume can be adjusted using the volume control dial on the receiver.
Distance Alarm LED Lights
over 5 ft (1.5 m)
No beep No LEDs illuminate
4.9-3.9 ft (1.5-1.2 m)
sBEEP Green LED illuminates
3.9-3.2 ft (1.2-1.0 m)
ssBEEP Green LED illuminates
3.2-2 ft (1.0-0.6 m)
sssBEEP Yellow LED illuminates
2-1.3 ft (0.6-0.4 m)
ssssBEEP Yellow LED illuminates
under 1.3 ft (0.4 m)
Constant sound All LEDs illuminate
CARE AND MAINTENANCE
Storage
Store this Wireless Parking Sensor in a cool, dry area and keep it away from direct sunlight, heat, excessive
humidity and dampness.
Cleaning
Do not clean or wipe the Wireless Parking Sensor with solvents or chemical materials. If necessary, remove
dirt or stains using a soft cloth dampened with a mild detergent solution.
Disposal
The Wireless Parking Sensor is designed to provide years of service. The Wireless Parking
Sensor should be recycled or safely disposed of at a local recycling center. Examples of places
that will accept items like this are: county or municipal recycling drop-off centers or scrap
metal dealers.
SPECIFICATIONS
1. DC Input Voltage 11-16V
2. Controller Operation Current 40 ± 10mA
3. Receiver Operation Current 110 ± 10mA
4. Receiver Unobstructed Range 98 ft (30 m)
5. Alarm Volume at 11.8 in. (30 cm) Away 60 ± 10dB
6. Frequency 433.92 ± 0.2MHz
7. Working Temperature -4°F to 131°F (-20°C to 55°C)
6