User Manual

CONTENTS
SAFETY PRECAUTIONS................................................................................................................2
Wireless Parking Sensor Safety..............................................................................................2
INTRODUCTION.............................................................................................................................2
FEATURES......................................................................................................................................3
INSTALLATION.............................................................................................................................4-5
OPERATION....................................................................................................................................6
CARE AND MAINTENANCE...........................................................................................................6
Storage ...................................................................................................................................6
Cleaning.................................................................................................................................. 6
Disposal ..................................................................................................................................6
SPECIFICATIONS ...........................................................................................................................6
FCC INFORMATION ....................................................................................................................... 7
TROUBLESHOOTING..................................................................................................................7-8
LIMITED WARRANTY .....................................................................................................................8
SAFETY PRECAUTIONS
This safety alert symbol indicates that a potential personal injury hazard is present. The symbol
is usually used with a signal word (e.g., WARNING) which designates the degree or level of hazard
seriousness.
The signal word WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
The signal word NOTICE indicates a situation which can cause damage to the product, other
personal property and/or to the environment, or cause the product to operate improperly.
The combination of the safety alert symbol and signal word is used in safety messages throughout
this manual and on safety labels on this product.
All safety messages that follow have
WARNING level hazards. Failure to
comply could result in death or serious injury.
Wireless Parking Sensor Safety
When installing the Wireless Parking Sensor, the vehicle must be turned off with the vehicle in park
and the park brake applied.
Do not attempt to install the Wireless Parking Sensor while the engine is operating.
Do not modify the wiring in any way.
Only install the Wireles Parking Sensor to a 12-volt DC system. Connecting to anything other than a 
12-volt DC system may damage the Sensor components or the vehicle electrical system.
If you are not confident working with 12-volt DC vehicle wiring, have the Wireless Parking Sensor
professionally installed.
This device as well as other wireless devices may be subject to interference. Interference may be
caused by cell phones, Bluetooth headsets, Wi-Fi routers, power lines and other various electrical
equipment.
Keep all power cords and wires away from the vehicle’s mechanical controls.
Do not install the Wireless Parking Sensor to the front of your vehicle.
Do not use in a vehicle which has an alarm or horn when driving in reverse.
Do not paint or spray the sensors.
INTRODUCTION
The Wireless Parking Sensor is an automatic object warning system, used when backing up a vehicle.
Information about the clearance between the vehicle and an object is displayed on the receiver inside
the vehicle.
When the vehicle is driven in reverse, the rear sensors mounted on the license plate transmit a
signal. If the signal detects an object, it sends a signal to the controller. These signals are analyzed
by the controller’s microprocessor. When the system reads ultrasonic signals that shows the obstacle
is moving from one detection zone to another, it activated automatically with a three seconds RF signal
This sends a signal to the receiver which identifies the clearance between the rear of the vehicle and
the object. The distance is indicated with tones and LED indicators on the receiver.
2