Instructions / Assembly

6
Parts and Support
Please do not return this product to the
store prior to contacting Precision.
At Precision Products, Inc. our goal is to deliver
quality, value and outstanding service. If for any
reason our product does not meet your expecta-
tions, please contact us and we will take care of any
problem you may have with this unit.
When ordering replacement parts please have the
model number, part description, part number, in-
spector number and date on carton, available so
that we can best serve you.
1 [phone]
www.precisionprodinc.com
Precision Products Inc.
316 Limit St.
Lincoln IL 62656
STOP
Operation
 TO DUMP - Pull Latch toward lawn tractor and
Cart Body will tilt back to dump position.
 TO RETURN TO PULLING POSITION - Push down
on front edge of Cart Body until Latch engages
and secures to Tow Bar.
 Tractor speed should be governed by weight of
load. The heavier the load, the slower the speed
for safe operation.
Maintenance Instructions
 Keeping the cart clean and dry will prolong the
unit’s life.
 Grease Wheels at regular intervals, at least once
every six months, more frequently if used regu-
larly.
 Should rust develop, sand lightly then paint area
with enamel paint.
 Check tire pressure at regular intervals. Proper
inflation will prolong the life of tires (see side of
tire for inflation amount.
9. Place one 3/4” Flat Washers on each side of Axle next to
Undercarriage. Next place Wheel onto Axle, add one or two
3/4” Flat Washer on outside of wheel Secure Wheel in
place by inserting Cotter Pin through hole in the end of
Axle and spreading the legs of the Cotter Pin outward.
Repeat the Wheel attachment step for the other wheel. See
Figure 9.
10. Turn Cart to an upright position, then attach Tow
Bar to Hitch of tractor, placing Clevis Pin through
Clevis Plate Hole and securing with Clevis Pin Clip.
Insert 1” x 1” Tube Plug into Tailgate Support Tube.
See Figure 10.
Figure 10
Clevis Pin
Clevis Pin
Clip
Figure 9
3/4” Flat
Washer
Cotter Pin
Cotter Pin
3/4” Flat
Washer
1” x 1” Tube Plug
3
10 11
17 18
13
16 15
14
12
21
19
20
Shown Full Size
22
Ref.
Qty. Description
10
11
12
13
14
15
16
17
18
19
20
21
22
2
8
1
4
1
8
2
6
1
8
1
2
1
5/16” x 3/4” Hex Head Bolt
3/8” x 3/4” Truss Head Bolt
1/4” x 3-1/2” Hex Head Bolt
5/16 x 3/4” Truss Head Bolt
1/2” x 1-3/4” Clevis Pin
3/8” Lock Washer
5/16” Lock Washer
5/16” Hex Head Nut
1/4” Reverse Lock Nut
3/8” Hex Head Nut
#14 Hitch Pin Clip
1/8’ x 1-1/4” Cotter Pin
Spring
* Hardware Sack may contain more parts than need for
assembly of this unit.