Instructions / Assembly

6
Parts and Support
Please do not return this product to
the store prior to contacting Precision.
At Precision Products, Inc. our goal is to deliver
quality, value and outstanding service. If for any
reason our product does not meet your expecta-
tions, please contact us and we will take care of
any problem you may have with this unit.
When ordering replacement parts please have the
model number, part description, part number, in-
spector number and date on carton available so
that we can best serve you.
1 [phone]
www.precisionprodinc.com
Precision Products Inc.
316 Limit St.
Lincoln IL 62656
STOP
9. Place 3/4” Flat Washer one on each side of Axle next to
Undercarriage. Next place Wheel onto Axle. Place another
3/4” Flat Washer on outside of wheel. Secure Wheel in
place by inserting Cotter Pin through hole in the end of
Axle and spreading the legs of the Cotter Pin outward.
Repeat the Wheel attachment step for the other wheel.
Two extra 3/4” Flat Washers are included, if needed to be
used as spacers. See Figure 9.
10. Turn Cart to an upright position, then attach Tow
Bar to Hitch of tractor, placing Clevis Pin through
Clevis Plate Hole and securing with Hitch Pin Clip.
Figure 10
Clevis Pin
Hitch Pin
Clip
Figure 9
Cotter Pin
3/4” Flat
Washer
Cotter Pin
Operation
 TO DUMP - Pull Latch toward lawn tractor and
Cart Body will tilt back to dump position.
 TO RETURN TO PULLING POSITION - Push
down on front edge of Cart Body until Latch en-
gages and secures to Tow Bar.
 Tractor speed should be governed by weight of
load. The heavier the load, the slower the speed
for safe operation.
Maintenance Instructions
 Keeping the cart clean and dry will prolong the
unit’s life.
 Grease Wheels at regular intervals, at least once
every six months, more frequently if used regu-
larly.
 Should rust develop, sand lightly then paint area
with enamel paint.
 Check tire pressure at regular intervals. Proper
inflation will prolong the life of tires (see side of
tire for inflation amount.