Instructions / Assembly

4
Assembly Instructions
Tools Needed For Cart Assembly
(2) 7/16” Wrenches
(2) 1/2” Wrenches
(1) 9/16” Wrench
(1) Pair Pliers
(1) Large Standard or Flat Screwdriver
Remove from Carton
Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
them using the illustrations on pages 2 and 3.
1. Slide Spring over the Latch Handle as shown in
Figure 1.
2. Slide the 1/4” x 3” Spacer through the Spring
and Latch as shown in Figure 2.
1/4” x 3”
Spacer
Figure 2
Latch
Spring
3. Slide the Latch, Spring and Spacer through the
Tow Bar. This will cause the Spring to open. See
Figure 3.
4. Slide 1/4” x 3—1/2” Hex Head Bolt through
Spacer and secure with a 1/4” Nylock Nut.
See Figure 4.
Figure 1
Figure 3
Spring
Top of Tow Bar
Latch
Pedestal Tab
1/4” x 3
1/2”
Hex Head
1/4” Ny-
lock Nut
Figure 4
3/8” Lock
Washer
3/8” Hex
Head Nut