Product Manual

6
3. Place unit in a vertical position with the Fertilizer Hopper facing up, place the Bolt into the Fertilizer Lever,
then into the corresponding hole in the Hopper. Push the 1/4” Flat Threaded Plate up into position. Attach
the Bolt to the Plate. See Figure 3.
Hopper
Fertilizer Lever
1/4” x 3/4” Hex Head Bolt
1/4” Flat Threaded Plate
Cross Section of Fertilizer Hopper
Figure 3
7
4. Assemble Row Marker to Row Marker Tube with 1/4” x 5/8” Carriage Bolt,1/4” Wing Nut, 10-24 x 1/2”
Slotted Pan Screw and the KEPS Nut. Place Marker Row Tube Cap on end of Row Marker Tube. See Figure 4.
Figure 4
Marker Row Tube
Marker Row Tube Cap
1/4” Wing Nut
1/4” x 5/8” Carriage
Bolt
1/4” KEPS Nut
10-24 x 1/2” Slotted Pan Screw