Product Manual

4
Assembly Instructions
Tools Required for Assembly
(2) 7/16” Wrenches
(2) 1/2” Wrenches
Remove from Carton
Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify them
using the illustrations on pages 2 through 3.
Assembly Instructions
1. Remove two 1/4” x 1–1/4” Hex Head bolts and two 1/4” Hex Head Nuts from the top of the lower handle
tubes. See Figure 1.
Figure 1
1/4” x 1 –1/4”
Hex Head Bolt
1/4” x 1 –1/4”
Hex Head Bolt
Lower Handle
Tube
1/4” Hex
Head Nuts
9
6. Take Furrow Shoe and Furrow Shoe Clamp, joining them together using two 1/4” x 5/8” Carriage Bolts and
two 1/4” Wing Nuts. Do not tighten until you place them onto the Seed Feeder Tube and set at the
appropriate height. See Figure 6.
1/4” Wing
Nuts
Furrow Shoe
Furrow Shoe
Clamp
Seed Feeder Tube
1/4” x 5/8”
Carriage Bolt
Figure 6